Specifications

123
Installed
Sound
LM 3
SPECIFICATIONS
Bass rolloff filter: 250 Hz, -10 dB at 50 Hz
Electrical impedance: ≤600 ohms
Recommended load impedance: ≥2,000 ohms
Power requirement: LM 3: 9 to 52 V phantom power to DIN/IEC
LM 3 L: 1.5 to 10 V
Current Consumption: ≤2 mA
Connector: LM 3: 3-pin XLR; LM 3L: 3-pin mini XLR
Cable length: 1.5 m (5 ft.)
Finish: matte dark grey
Size: 13.5 dia x 27 mm (0.5 dia. x 1.1 in.)
Net/shipping weight: LM 3: 5/157 g (0.18/5.5 oz.)
LM 3L: 5/96 g (0.18/3.4 oz.)
Standard accessories: H 31 lavalier clamp
Optional accessories: LM 3: B 18, MK 9/10, N 62E, N 66E
LM 3 L: B 29L, MPA IIIL
Item numbers
LM 3 2765Z0015
LM 3L 2765Z0016
• Versatile lavalier module
• For use with omni, cardioid, or hypercardioid
Capsule Modules
• H 31 microphone clamp for alignment
in four 90° increments
• Integrated LED ring status indicator for phantom or
external powering
Only 3 cm (1.2 in.) long, the LM 3 will keep a very low
profile in every speech reinforcement situation. In con-
junction with a CK 31 cardioid, CK 32 omnidirectional, or
CK 33 hypercardioid Capsule Module, the LM 3 will do an
excellent job in the most difficult of miking situations.
The standard version comes with a phantom power
adapter for hardwire systems while the LM 3L can be used
with all AKG WMS wireless systems.
The clamp on the LM 3 has been designed to hold the
microphone in either a horizontal or vertical position so
the LM 3 can be clipped on the talker's clothes or on the
stage decoration.
7496_04_Fulline_E2_fsch 29.06.2004 13:29 Uhr Seite 123