Specifications

Item numbers
GN 15ES 2765Z0011
GN 30ES 2765Z0012
GN 50ES 2765Z0013
Installed
Sound
GN ES SERIES
SPECIFICATIONS
Bass rolloff filter: 250 Hz, -10 dB at 50 Hz
Electrical impedance: ≤600 ohms
Recommended load impedance: ≥2,000 ohms
Power requirement: 9 to 52 V phantom power to DIN/IEC
Current Consumption: ≤3 mA
Connector: 3-pin male XLR
Finish: matte dark grey
Size: max. dia.: 20 mm (0.8 in.),
length: 258/403/598 mm (10.2/15.7/22.4 in.)
Net/shipping weight: 72/400 g (2.5/14.1 oz.),
110/522 g (3.9/18.4 oz.),
120/495 g (4.2/17.5 oz.)
Standard accessories: DPA phantom power adapter
(integrated), screw set with rubber
bush, PS 3F-Lock
Optional accessories: B 18, H 500, H 600,
MF-DA installation flange, MK 9/10,
N 62 E, N 66E, SA 60, ST 45
• Gooseneck modules with integrated XLR connector
and noiseless on/off switch
• Integrated LED ring status indicator
• Choice of five different Capsule Modules
• Integrated, jumper selectable bass rolloff
Gooseneck Modules for quick setup and takedown, with
integrated low-noise on/off switch. The switch will
default to “off” as the sound system is powered up and
needs to be pressed to activate the microphone. An LED
ring indicates whether the microphone is on or off.
GN ES Series goosenecks are available in three different
lengths. GN 15 ES: approx. 26 cm (10.2 in.); GN 30 ES:
approx. 40 cm (15.7 in.); GN 50 ES: approx. 57 cm
(22.4 in.). GN ES Series goosenecks feature a jumper
selectable, 250 Hz bass rolloff and an LED on/off jumper.
117
7496_04_Fulline_E2_fsch 29.06.2004 13:29 Uhr Seite 117