Specifications

MICROMIC III SERIES
C 411 ACOUSTIC PICKUP “MICROMIC”
The C 411 condenser acoustic pickup with its tailored frequency
response is ideal for acoustic guitar, mandolin, violin and most other
stringed instruments. Placing the small ultra-light C 411 on or near
the bridge will reproduce a clear and uncolored sound without chang-
ing the balance of the instrument. Attaching the C 411 is easy with
the included non-marring reusable adhesive compound. The C 411 is
the stethoscope for your acoustic instruments.
C 416 INSTRUMENT “MICROMIC”
The C 416 hypercardioid condenser microphone frequency re-
sponse has been tailored for use with all types of low profile micing
applications such as guitar cabinets, piano, keyboard/organ cabi-
nets, and accordion. When your performance is over, simply remove
the C 416’s gooseneck by detaching it from the mounting bracket.
Mounting is made easy with the included screws or the double sided
non-marring adhesive pads. Placing the microphone exactly where
you need it is always possible with the C 416.
C 418 DRUM AND PERCUSSION “MICROMIC”
The C418 hypercardioid condenser microphone has a specifically
tailored frequency response for drum and percussion micing applications.
Its two angle adjustment boom-arm with the vibration resistant rubberized
clamp make it easy to place on any drum or percussion instrument.
The C 418 elastomer shock-mounted capsule adds additional rejec-
tion of vibration noise while withstanding even the heaviest drum-
stick blows.
D 409 DYNAMIC “MICROMIC” FOR WIND
INSTRUMENTSS, DRUMS AND PERCUSSIONS.
The D 409 MicroMic is the dynamic alternative to the C 419 con-
denser version. It provides a powerful sound and requires no phan-
tom power. The smooth frequency response of the D 409 ensures
uncolored audio. A neutral sound with little proximity effect and a
slight presence rise between 3 and 7 kHz will make your instrument
cut through the loudest mix on stage.
C 419 WIND INSTRUMENT “MICROMIC”
The C 419 hypercardioid condenser microphone was developed
especially for saxophone, trumpet, trombone, tuba and almost all
other brass/wind instruments. Its rubberized non-marring clamp
along with the adjustable elastomer suspension gooseneck makes for
superior isolation while allowing problem free placement on any horn
instrument. The C 419 hypercardioid transducer element delivers a
smooth frequency response with a gentle high frequency peak while
maintaining a high resistance against feedback. The C 419 allows
the performer to reach the audience with power and clarity while
maintaining freedom to move on stage.
C 419
15
STUDIO/BROADCAST/STAGE
MICROMIC III SERIES
C 418
D 409
C 420
C 416
B 15
B 29 L
C 411
MICROMIC III SERIES
14
STUDIO/BROADCAST/STAGE
C 420 HEADSET “MICROMIC”
The C 420 cardioid condenser microphone was designed with a
full frequency response bandwidth that delivers a pure powerful
sound and carries punch and presence to the audience. It is ideal for
front vocalists, singing keyboard players, drummers, guitarists,
dancers and aerobic instructors. It has a new and fully adjustable
headband and ear pieces that fit comfortably and securely on your
head. The C 420 has the cable exiting from the rear of the headband
to stay out of the way of your performance. When you require hands
free performance capabilities, the C 420 headset is your answer.
C 430 CYMBALS, DRUMS AND PERCUSSIONS
OVERHEAD “MICROMIC”
Specifically designed for cymbal and overhead micing, the fre-
quency response of the C 430 ensures a uniquely crisp sound. With
its extremely compact external dimensions, this microphone will keep
a low profile on the drum kit without compromising audio quality.
C 444 L HEADSET “MICROMIC”
The C 444 L is extremely easy to use, rests securely and com-
fortably on the head, and is perspiration-resistant. A dedicated mois-
ture shield prevents perspiration and water from penetrating into the
transducer capsule.
OPTIONAL ACCESSORIES
B 29 L battery supply for 2 MicroMics
MPA III L phantom power adapter
MicroMic III Series microphones are available in two different config-
urations:
“PP” versions with standard 3-pin XLR connector for phantom
powering.
“L” versions for battery powering from the B 29 L or phantom
powering using the MPA III L phantom adapter.
The B 15 is an in-line battery supply for C 4 PP versions of MicroMic
III Series microphones that also connects directly to the C 430 over-
head MicroMic. An integrated on/off switch helps prolong battery
life. The B 15 uses a single AAA size 1.5 V battery. Average battery
life is 30 hours. The B 15 can also be used for all commercial con-
denser microphones operating off 12 V phantom power.
C 444 L
C 430
MPA III L