Specifications

45
44
SPECIFICATIONS
SPECIFICATIONS
C 414 B-XLS
POLAR PATTERNS Omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight
F
REQUENCY RANGE 20 to 20,000 Hz
S
ENSITIVITY 23 mV/Pa (-33 dBV) ± 0.5 dB
M
AX. SPL FOR 0.5% THD 140/146/152/158 dB SPL
E
QUIVALENT NOISE LEVEL 6 dB-A
S
IGNAL/NOISE RATIO 88 dB
P
REATTENUATION PAD -6 dB, -12 dB, -18 dB, switchable
B
ASS CUT FILTER 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
I
MPEDANCE < 200 ohms
R
ECOMMENDED LOAD IMPEDANCE 2,200 ohms
P
OWER REQUIREMENT 48 V phantom power to DIN/IEC
C
URRENT CONSUMPTION approximately 4.5 mA
C
ONNECTOR 3-pin XLR to IEC
D
IMENSIONS 50 x 38 x 160 mm (2.0 x 1.5 x 6.3 in.)
N
ET WEIGHT 300 g (10.6 oz.)
C 426 B comb
POLAR PATTERNS: cardioid, omni-directional, figure eight, and six intermediate positions, remotely selectable
F
REQUENCY RANGE: 20–20,000 Hz
S
ENSITIVITY: 11 mV/Pa (-39 dBV) per channel
M
AX. SPL FOR 0.5 % THD: 132/142 dB
E
QUIVALENT NOISE LEVEL: 14 dB-A
S
IGNAL/NOISE RATIO (A WEIGHTED): 80 dB
P
REATTENUATION PAD: -10 dB, switchable
B
ASS CUT FILTER: 12 dB/octave at 75 Hz
E
LECTRICAL IMPEDANCE: 200 Ω
R
ECOMMENDED LOAD IMPEDANCE: >1,000 Ω
P
OWER REQUIREMENT: 9 to 52 V phantom power to DIN 45 596
C
URRENT CONSUMPTION: <2 mA per channel
C
ONNECTOR: 12-pin DIN
C
ABLE LENGTH: 20 m (66 ft)
F
INISH: matte black/silver
S
IZE: DIA.: 42/33 mm (1.6/1.3 in.); length: 235 mm (9.2 in.)
N
ET/SHIPPING WEIGHT: 470 g/5.1 kg (16.6 oz./11.3 lbs.)
S
TANDARD ACCESSORIES: H 15/33, W 426, MK 42/20, S 426
O
PTIONAL ACCESSORIES: B 18
C 4500 B-BC
POLAR PATTERN: cardioid
F
REQUENCY RANGE: 30–20,000 Hz
S
ENSITIVITY: 20 mV/Pa (-34 dBV ±2 dB)
M
AX. SPL FOR 0.5 % THD: 145/165 dB SPL
E
QUIVALENT NOISE LEVEL: 20 dB (DIN 45 505, CCIR 468-2)/8 dB-A (DIN 45 412)
S
IGNAL/NOISE RATIO (A-WEIGHTED): 86 dB (for 48 V, -6 dB for 24 V, -18 dB for 12 V phantom power)
P
REATTENUATION PAD: -20 dB, switchable
B
ASS CUT FILTER: 6 dB/octave below 120 Hz
E
LECTRICAL IMPEDANCE: ≤200 Ω
R
ECOMMENDED LOAD IMPEDANCE: ≥1,000 Ω
P
OWER REQUIREMENT: 9 to 52 V phantom power to DIN 45 596/IEC 268-15
C
URRENT CONSUMPTION: ≤2 mA
C
ONNECTOR: 3-pin male XLR
F
INISH: silver gray
S
IZE: dia.: 58 mm (2.3 in.); length: 183 mm (7.2 in.)
N
ET/SHIPPING WEIGHT: 450 g/1 kg (1 lb./2.2 lbs.)
S
TANDARD ACCESSORIES: H 100, W 4000
O
PTIONAL ACCESSORIES: B 18, KM 238/5
SPECIFICATIONS
SPECIFICATIONS
C 12 VR
POLAR PATTERNS: cardioid, omni-directional, figure eight, and six intermediate positions selectable on remote control.
F
REQUENCY RANGE: 30–20,000 Hz
S
ENSITIVITY: 10 mV/Pa (-40 dBV); can be increased by 10 dB by a switch in the microphone
M
AX. SPL FOR 3 % THD: 128 dB
E
QUIVALENT NOISE LEVEL: 22 dB-A
S
IGNAL/NOISE RATIO (A-WEIGHTED): 72 dB
P
REATTENUATION PAD: -10 dB or -20 dB, selectable
B
ASS CUT FILTER: 6 db/12 dB/octave at 120 Hz
E
LECTRICAL IMPEDANCE: 200 Ω
R
ECOMMENDED LOAD IMPEDANCE: >1,000 Ω
P
OWER REQUIREMENT: standard power supply
C
URRENT CONSUMPTION: as above
C
ONNECTOR: 12-pin DIN
C
ABLE LENGTH: 10 m (33 ft)
F
INISH: green/gold
S
IZE: dia.: 42 mm (1.6 in.); length: 225 mm (8.8 in.)
N
ET/SHIPPING WEIGHT: 680 g/4.5 kg (24 oz./10 lbs.)
S
TANDARD ACCESSORIES: N 12 VR, H 15/T, MK/Tube, W 42
SOLIDTUBE
POLAR PATTERN: cardioid
F
REQUENCY RANGE: 20–20,000 Hz
S
ENSITIVITY: 20 mV/Pa (-34 dBV)
M
AX. SPL FOR 3 % THD: 130/145 dB
E
QUIVALENT NOISE LEVEL: 20 dB-A
S
IGNAL/NOISE RATIO (A-WEIGHTED): 74 dB
P
REATTENUATION PAD: -20 dB, switchable
B
ASS CUT FILTER: 12 dB/octave at 100 Hz
E
LECTRICAL IMPEDANCE: 200 Ω
R
ECOMMENDED LOAD IMPEDANCE: >1,000 Ω
P
OWER REQUIREMENT: standard power supply
C
URRENT CONSUMPTION: as above
C
ONNECTOR: 6-pin XLR
C
ABLE LENGTH: 10 m (33 ft)
F
INISH: silver gray
S
IZE: dia.: 63.5/57 mm (2.5/2.2 in.); length: 219 mm (8.6 in.)
N
ET/SHIPPING WEIGHT: 920 g/5 kg (32.5 oz./11.1 lbs.)
S
TANDARD ACCESSORIES: N-SOLID, H-SOLID, MK-SOLID, W-SOLID
C 4000 B
POLAR PATTERN: omni-directional, cardioid, hypercardioid
F
REQUENCY RANGE: 20–20,000 Hz
S
ENSITIVITY: 25 mV/Pa (-32 dBV)
M
AX. SPL FOR 1 %/3 % THD: 145/155 dB
E
QUIVALENT NOISE LEVEL: 8 dB-A
S
IGNAL/NOISE RATIO (A-WEIGHTED): 86 dB
P
REATTENUATION PAD: -10 dB, switchable
B
ASS CUT FILTER: 12 dB/octave at 100 Hz
E
LECTRICAL IMPEDANCE: 200 Ω
R
ECOMMENDED LOAD IMPEDANCE: >1,000 Ω
P
OWER REQUIREMENT: 9 to 52 V phantom power to DIN 45 596
C
URRENT CONSUMPTION: <2 mA
C
ONNECTOR: 3-pin male XLR
F
INISH: silver gray
S
IZE: dia.: 58 mm (2.25 in.); length: 183 mm (7.2 in.)
N
ET/SHIPPING WEIGHT: 450 g/1 kg (1 lb./2.2 lbs.)
S
TANDARD ACCESSORIES: H 100, W 4000
O
PTIONAL ACCESSORIES: B 18, SA 41/1
C 414 B-XL II
TYPE 1-inch large-diaphragm pressure gradient microphone
P
OLAR PATTERNS Omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight
F
REQUENCY RANGE 20 to 20,000 Hz
S
ENSITIVITY 23 mV/Pa (-33 dBV) ± 0.5 dB
M
AX. SPL FOR 0.5% THD 140/146/152/158 dB
E
QUIVALENT NOISE LEVEL 6 dB-A
S
IGNAL/NOISE RATIO (A-WEIGHTED) 88 dB
P
REATTENUATION PAD -6 dB, -12 dB, -18 dB, switchable
B
ASS CUT FILTER 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
I
MPEDANCE < 200 ohms
R
ECOMMENDED LOAD IMPEDANCE 2,200 ohms
P
OWER REQUIREMENT 48 V phantom power to DIN/IEC
C
URRENT CONSUMPTION approximately 4.5 mA
C
ONNECTOR 3-pin XLR to IEC
D
IMENSIONS 50 x 38 x 160 mm (2.0 x 1.5 x 6.3 in.)
N
ET WEIGHT 300 g (10.6 oz.)
cardioid
figure-eight
omni-directional
cardioid
hxpercardioid
omni-directional
omni-directional
wide cardioid
cardioid
hypercardioid
figure-eight
omni-directional
wide cardioid
cardioid
hypercardioid
figure-eight
figure-eight
omni-directional
cardioid
C 3000 B
POLAR PATTERNS: cardioid
F
REQUENCY RANGE: 20–20,000 Hz
S
ENSITIVITY: 25 mV/Pa (-32 dBV)
M
AX. SPL FOR 0.5 % THD: 140/150 dB
E
QUIVALENT NOISE LEVEL: 14 dB-A
S
IGNAL/NOISE RATIO (A WEIGHTED): 80 dB
P
REATTENUATION PAD: -10 dB, switchable
B
ASS CUT FILTER: 6 dB/octave below 500 Hz
E
LECTRICAL IMPEDANCE: 200 Ω
R
ECOMMENDED LOAD IMPEDANCE: >1,000 Ω
P
OWER REQUIREMENT: 9 to 52 V phantom power to DIN 45 596
C
URRENT CONSUMPTION: <2 mA
C
ONNECTOR: 3-pin male XLR
F
INISH: silver gray
S
IZE: DIA.: 53 mm (2.1 in.); length: 162 mm (6.4 in.)
N
ET/SHIPPING WEIGHT: 320/950 g (11.3 oz./2.1 lbs.)
S
TANDARD ACCESSORY:H 100
O
PTIONAL ACCESSORIES: B 18, SA 41/1, W 414