Specifications

AS 16 X 12 AUTOMATIC MIXER
The high quality AS 16 x 12 combines a 16-channel mic/line
automatic mixer and freely programmable 16 x 12 matrix in a 2-U
19" case. The AS 16 x 12 provides up to eight independent sub-
groups. Programmable logic inputs and outputs and the supplied
LecNet™ software make programming, integration in media and/or
hardware control systems, and day-to-day operation easy and intu-
itive. The AS 16 x 12 is the perfect choice wherever professional
NOM attenuation, speaker zoning, and/or signal distribution to sev-
eral rooms are required. The Adaptive Proportional Gain mixing algo-
rithm uses no gating and thus will never clip a syllable, provides
inaudible gain control, and dramatically improves sound quality and
gain before feedback.
“Mix-minus” sound reinforcement, multi-channel recording and
separate media feeds can all be accomplished simultaneously with a
single AS 16 x 12 mixer. The AS 16 x 12 can be daisy-chained and
provides a special expansion input for connecting an AS 8 to add
more input channels.
The AS 16 x 12 is ideal for courtrooms, boardrooms, learning
centers, conference centers, auditoriums, worship centers and many
other applications.
FEATURE HIGHLIGHTS
• 16-channel automatic microphone mixer plus 16 x 12 program-
mable matrix mixer
• 8 assignable NOM Buses
• 17 programmable inputs and 19 programmable logic outputs
• Built-in 4 room combining capability
• RS-232 controllable - AMX® and Crestron™ compatible
DFM 4 X 4 MULTICHANNEL DSP
The DFM 4 X 4 is a sophisticated DSP based multi-channel audio
signal processing device. Based on a state-of-the-art 32-bit floating
point digital signal processor, internal calculations are carried out
with greater than 1600 dB dynamic range. 24-bit A/D and D/A con-
version guarantees superior audio signal quality.
The DFM 4 x 4 acts as a feedback eliminator with up to 12 user
adjustable filters on each channel, automatic notch filters, and several
other types of EQs (parametric, shelving, highpass, etc.). In addition,
the DFM 4 x 4 provides a four-channel compressor, four-channel lim-
iter, and four-channel delay.
A complete 4 x 4 matrix on the input makes the DFM 4 x 4 an
uncommonly versatile processor for feedback elimination, speaker
zoning, delay control, and complete system control.
FEATURE HIGHLIGHTS
• Automatic Digital Feedback Eliminator (ADFE) on each channel
• Up to 12 user adjustable filters on each channel
• Complete 4 x 4 matrix on the input
• Compressor, limiter, and audio delay on each channel
• RS-232 serial port for control by PC, AMX®, or Crestron™ –
8 non-volatile preset memories
CS2 CONFERENCE SYSTEMS
23
SOUND SYSTEMS
AS 16 X 12
SOUND SYSTEMS
SIGNAL PROCESSORS
22
DFM 4 x 4
Please note:
Detailed information about specifications, and architects’ and engineers’
specifications are available from our website at: http://www.akgusa.com
CS 2 CONFERENCE SYSTEM
AKG Conference Systems are fully modular and therefore highly flexible, allowing users to create a custom system for any conference application.
From microphone capsules to power supplies, designers will find exactly the right components for every type of conference system.
AKG Conference Systems use standard single-cable wiring for quick and easy setup and takedown of mobile systems. In addition, single-cable wiring
will save time and money in fixed installations, too.
Control options include analog control by the Base Station (CS 2).
2. Goosenecks
Two goosenecks in different lengths
3. Microphone Stations
Chair and Delegate Microphone Stations for permanent installation
or mobile use.
5. Base Station
Central control unit for up to 200 Microphone Stations,
with expansion in/out
6. Power Supplies
Power supplies (w/o IEC power cord)
for 40 to 200 Microphone Stations
4. Connecting Cables
Cable lengths:
4 ft (1.25 m) to 66 ft (20 m)
CS 2 DU CS 2 CU
CS PS 100CS PS 20
CS 2 DU Fix CS 2 CU Fix
GN 50 CS
GN 30 CS
1. Capsules
Choice of five Discreet Acoustics Modular Series
microphone capsules
CK 31 CK 32 CK 33 CK 47 CK 80
SYSTEM COMPONENTS: