Specifications

PODIUM/GOOSENECK MICROPHONES
INSTALLED SOUND
17
D 542
D 58
D 58 E
BOUNDARY MICROPHONES/HEADSETS
INSTALLED SOUND
16
C 562 CM
C 747 CONDENSER MICROPHONE
Thanks to its pencil-thin housing, the C 747 is nearly invisible in
most applications, yet it picks up voices and instruments at surpris-
ing distances with phenomenal accuracy and clarity. The C 747 is a
premium quality “spot” microphone designed to solve difficult place-
ment problems and is universally applicable for voices or instruments
for live sound or recording.
The C 747’s hypercardioid pickup is designed to be “forgiving”
in its placement, making it an excellent choice for critical podium,
pulpit or boardroom applications where speakers tend to move and
wander off-axis. It also works well for pickup of orchestra and choirs
where close micing just isn’t practical.
The C 747’s tuned interference tube provides uniform off-axis
rejection to control ambient noise and feedback in difficult environ-
ments, such as houses of worship. An LF roll-off switch is also provid-
ed to filter out rumble from mechanical vibration. The transformerless
preamp operates on 9 – 52 V phantom power.
Thanks to all its accessories including a shock mount/adapter,
windscreen, mini gooseneck, swivel stand adapter mounting clamp
and thread link, the C 747 is ready to mount and use in a wide vari-
ety of applications.
D 542 PA MICROPHONE
A rugged, affordable dynamic cardioid gooseneck microphone for
general public address and communications use. The D 542 provides
a frequency response tailored to speech use for optimum intelligibili-
ty as well as good off-axis rejection for high gain-before-feedback and
suppression of unwanted ambient noise. The matte gray, all-metal
body ensures a long useful life for the microphone even in rough day-
to-day use.
The D 542 E features a built-in XLR connector for quick connec-
tion, while the D 542 has been designed for permanent (single-hole
or screw-on) installation and comes with a 6-ft, 4-in. (2-m) fixed,
unterminated cable.
Available versions:
D 542 for fixed installation
D 542 E with integrated XLR connector
D 542 ST-S with table stand, switch, and XLR-cable
D 58, D 58 E
A special, close-talk dynamic microphone for communications,
paging and talkback in high ambient noise and feedback-prone
environments (e.g. railroad stations, airports, restaurants, etc.).
Designed for close-up use, the D 58 dramatically attenuates
noise and feedback components originating more than three feet
away. Small and lightweight, the D 58 has an integral XLR
connector for mounting on a gooseneck or mic cable.
Finish is matte nickel. D 58E is matte black.
C 747
C 562 BL
D 542 ST-S
HSD 200 SR/OC COMMUNICATION-HEADSET
Specifically designed for use in very noisy environments, the HSD 200 SR/OC combines semi-open
headphones with a noise-canceling, dynamic microphone.
The HSD 200SR/OC uses a 10-ft (3-m) unterminated cable. Microphone connector: 3-pin XLR; head-
phones connector: gold plated 1/4" stereo jack.
HSC 200 SR BROADCAST-HEADSET
The HSC 200 SR features semi-open headphones and a high quality microphone. The electret microphone
rests in a shock mount that supresses both cable noise and acoustic leakage of the headphones signal into the
microphone. Microphone connector: 3-pin XLR; headphones connector: gold plated 1/4" stereo jack.
C 562 BL BOUNDARY MICROPHONE
Both versions of the C 562 offer the inherent advantages of boundary layer design: 6 dB higher sensi-
tivity and virtual elimination of comb filter effects when installed on reflective surfaces plus extended and
flattened frequency response. Both versions are omnidirectional in their hemispheres and are therefore
essentially insensitive to structurally transmitted noise. A high-sensitivity electret condenser capsule provides
superior S/N ratio and extended depth coverage.
The transducer element in the C 562BL is mounted in the center of a heavy 6.3" (160 mm) diameter
plate, ideal for tabletop or floor placement. Three perimeter holes are provided for permanent installation,
each with rubber mounts for shock isolation. A steel-reinforced cable terminates in a preamp/phantom power
adapter with electronically balanced output via an XLR connector. Windscreen included.
C 562 CM BOUNDARY MICROPHONE
The miniature C 562 CM is designed for flush mounting in ceilings, walls, conference tables, stage sets,
etc., with an attached cable terminating in a 1/8" (3.5 mm) male jack which threads through the 1/2"
mounting hole. An accompanying phantom power adapter provides electronically balanced low impedance
output via an XLR connector.