Specifications

GOOSENECK MICROPHONES
DAM+ ACCESSORIES
ST6
The ST6 is a heavy duty table stand for universal use. It provides two profes-
sional 3-pin SLR connectors as audio interface. The ST6 is compatible with
wide range of microphones, e.g. the gooseneck microphones of the 99er
and DAM+ series. Due to its heavy weight it is very well shock absorbing
and holds the microphone firm on place.
Item number: ST6 2966H00040
STS DAM+
The STS DAM+ is a heavy duty table stand with extremely good shock ab-
sorbing properties. It provides a 4 pin connector compatible with all DAM+
Series goosenecks as well as with the gooseneck microphones of the CS3
discussion system. The STS DAM+ features an extremely rugged switch
which can be programmed to the following functions: push to talk, push to
mute, push on/off, low cut on/off. The status of the microphone is displayed
by an LED square.
Item number: STS DAM+ 2966H00030
MF M
The MF M is a flush-mount module that efficiently reduces body noise from
tables. Its slim design can integrate each powering module of the DAM+ Se-
ries and allows the microphones to be detached when not in use. A special
blind cap seals the connector outlet, leaving an attractive flush interface in
the table and simultaneously sealing the connector to protect it against dust.
Item number: MF M 3165H00220
UWA9 M
The UWA9 M is a holder for wireless body-pack transmitters. It fits perfectly
on the GN155 M floor stand gooseneck module. In combination with the
MK150 ML it creates a wireless floor stand microphone for presentations or
for choir and instrumental recording. The rugged metal plate is covered with
foam to prevent scratching the transmitter housing. A universal Velcro strip
is used to hold any AKG wireless body-pack transmitter.
Item number: UWA9 M 3165H00280
W40 M
The W40 M is a reference windscreen with the highest performance in its
class. Two layers of mesh and a combination of foam reduce wind and pop
noise to a minimum. Its rugged wire-mesh grill securely protects the micro-
phone even under rough day-to-day usage. The W40 M is compatible with
the CK41 and CK43 capsules from the DAM+ Series.
Item number: W40 M 3165H00290
02
Harman Pro Group | 2013
Section:
02
Harman Pro Group | 2013
Section:
Page 129