Specifications

2.1 Introduction
Important!
2.2 Connecting
the Microphone
Disconnecting
the cable:
Important!
The C 555 L is a condenser microphone and
therefore needs a power supply.
Using any power supply other than those rec-
ommended by AKG may damage your micro-
phone and will void the warranty.
1. Plug the mini XLR connector on the micro-
phone cable all the way into one of the two mini
XLR sockets on the B 29 L, the mini XLR socket
on the connecting cable of the MPA V L, or the
input jack on your bodypack transmitter.
The connector will lock automatically.
• To disconnect the cable, press the unlocking
button on the mini XLR connector (1) and pull
the connector (1) out of the socket.
•
TToo aavvooiidd ddaammaaggiinngg tthhee ccaabbllee,, nneevveerr ppuullll aatt
tthhee ccaabbllee iittsseellff!!
2. B 29 L: Connect the B 29 L to the desired input.
MPA V L: Connect the MPA V L to a balanced
XLR microphone input with phantom power
and switch the phantom power on.
2 Interfacing
AKG C 555 L
15
L
!
L
!
C 555_Manual_D030929 15.12.2009 10:25 Uhr Seite 15 (Schwarz/Black Auszug)