User manual

Specifications

Type: 1-inch large-diaphragm pressure

gradient microphone

Polar patterns: cardioid

Sensitivity at 1000 Hz: 25 mV/Pa  -32 dBV ±2 dB

Frequency range: 20 to 20,000 Hz (refer to frequency

response curve)

Electrical impedance: ≤ 200 ohms

Recommended load impedance: ≥ 1000 ohms

Bass cut filter slope: 6 dB/octave below 500 Hz

Preattenuation pad: -10 dB, switchable

Equivalent noise level

to DIN 45 405 (CCIR 468-2): 25 dB

Equivalent noise level

to DIN 45 412 (A-weighted): 14 dB-A

Signal/noise ratio re 1 Pa

(A-weighted): 80 dB*)

Max. SPL for 0.5% THD (0/-10 dB):200 / 630 Pa  140 / 150 dB SPL*)

Dynamic range: 126 dB (A-weighted)*)

Environment: - temperature: -10°C to +60°C

- (14°F to 140°F)

- relative humidity: 90% (+20°C/68°F),

85% (+60°C/140°F)

Power requirement: 9 to 52 V phantom power

to DIN 45 596/IEC 268-15

Current consumption: ≤ 2 mA

Connector pinout: 3-pin male XLR to IEC standard

Size: max. dia.: 53 mm (2.1 in.),

length: 162 mm (6.4 in.)

Net weight: 320 g (14.1 oz.)

*) Values for 48 V phantom power; reduce by 3 dB for 24 V and 6 dB for

12 V phantom power.

This product conforms to standards EN 50 082-1 and EN 60 065.

Frequency Response Curve

Polar Pattern