Specifications

Page 40
')
?XidXeGif>iflgs)''-
')
?XidXeGif>iflgs)''-
J\Zk`fe1
J\Zk`fe1
')
?XidXeGif>iflgs)''-
')
?XidXeGif>iflgs)''-
J\Zk`fe1
J\Zk`fe1
MICROMIC III SERIES
16
STUDIO/BROADCAST/STAGE
C 419
C 416
C 411
C 418
MICROMIC III SERIES
C 411 ACOUSTIC PICKUP “MICROMIC”
• Ultra-light vibration pickup
• Condenser transducer in sealed enclosure
• Cable with lockable mini XLR connector
• Ideal for miking up acoustic guitars
and other string instruments
Weighing only 18 grams (0.6 oz.), this ultra-light conden-
ser pickup is ideal for acoustic guitar, mandolin, violin and most
other stringed instruments. The C 411 will give a clear and uncol-
ored sound without changing the balance of the instrument. Attaching
the C 411 on or near the bridge is easy with the included non-mar-
ring, reusable, solvent-free adhesive compound. You can also fix the
C 411 anywhere else on the instrument, depending on the desired
sound and the vibration performance of the instrument.
Only available as L-version.
C 416 INSTRUMENT “MICROMIC”
• Hypercardioid instrument microphone with
miniature installation bracket
• High mechanical-noise attenuation
• Ideal for miking up accordion, guitar, piano
as well as keyboard or organ amplifiers
Ultra-light hypercardioid miniature microphone for
use on accordion, guitar cabinets, piano and keyboard/organ cabi-
nets. When your performance is over, simply detach the microphone
from the H 416 mounting bracket and pack it separately. Mounting
the bracket is made easy with the included screws or the double
sided solvent-free adhesive pads. You can place the C 416 exactly
where you need it.
A special bracket even allows you to fix the C 416 on a clar-
inet. A highly efficient external shock mount reduces key
noise to a minimum.
Only available as L-version.
C 418 DRUM AND PERCUSSION “MICROMIC”
• Miniature hypercardioid condenser clip-on
microphone with shock mounted capsule
• Ideal for miking drums and percussions
• Microphone arm with additional angle joint
The C 418 miniature condenser clip-on microphone
has a specifically tailored frequency response for drum and percus-
sion miking applications and is an alternative to the C 419 for loud
trumpets. Its hypercardioid polar pattern rejects leakage from nearby
instruments. A solid clamp makes it easy to fix the microphone
securely on the instrument. The H 418 allows you to attach the
microphone on top hoops that may be too thick for the integrated
clamp. The C 418 shock-mounted capsule provides high mechanical-
noise rejection and is extremely ruggedly built. A two-angle
adjustment arm ensures precise microphone alignment.
C 419 WIND INSTRUMENT “MICROMIC”
• Miniature condenser microphone for wind
instruments, drums and percussion
• Miniature gooseneck for accurate microphone
alignment
• Transducer shock mount reduces handling
and cable noise
This condenser clip-on microphone has been designed specif-
ically to clip onto the bell of a saxophone, trumpet, trombone, tuba,
or any other wind instrument (e.g. didgeridoo). Room to
move for the wind section at last!
A tight hypercardioid polar pattern reduces spillover from nearby
monitor wedges to a minimum. The flat frequency response of the
C 419 provides a natural, powerful, and clear sound.
3269_FullLineEngl1.qxd 29.11.2005 14:11 Uhr Seite 16