User Guide

–14 dB – attenuation of –14 dB, dynamic microphone output level,

flat, overload limit: 144 dB SPL.

Applications: recording high sound level instruments, or pre-

vention of overloading of mixer or amplifier inputs which are

adjusted for dynamic microphones.

–14 dB preattenuation of –14 dB (as above) with additional bass

rolloff filter below 500, slope: 4 dB/octave.

Applications: as above, mainly vocalist, but also instrumen-

tal recording, close-in miking in situations requiring effective

suppression of proximity effect.

The die-cast zinc alloy housing contains the preamplifier, d.c. voltage

regulator circuit, impedance converter, output transformer, and the

3-pin standard XLR connector (male).

Wiring: balanced, ungrounded.

The surface of the C 535 EB is matte black; therefore, the microphone

is highly inconspicuous which is a particular advantage in television

and stage work. Strong spotlights will not cause irritating light

reflections.

The C 535 EB is designed for external universal phantom powering

(9 … 52 volts, according to DIN 45596) and may be fed from mixers,

tape recorders, battery, or mains operated power supply units. Current

consumption is lower than 1 mA.

Your C 535 EB carries its individual serial number and is packed in a

solid case lined with a soft foam material, complete with a “Quick

Release” stand adapter (SA 41/1).