Owners Manual
Table Of Contents
- 1 Allgemeines
- 2 Konformitätserklärung
- 3 MicroLite: Beschreibung allgemein
- 4 Lavaliermikrofone
- 5 Ohrbügelmikrofone
- 6 Kopfbügelmikrofone
- 7 Mikrofon anschließen
- 8 Anwendung
- 9 Reinigung
- 10 Technische Daten
- 11 Fehlerbehebung
- 1 General
- 2 Declaration of Conformity
- 3 MicroLite: General description
- 4 Lavalier microphones
- 5 Ear hook microphone
- 6 Headworn microphones
- 7 Connecting the microphone
- 8 Use
- 9 Cleaning
- 10 Technical data
- 11 Troubleshooting
- 1 Généralités
- 2 Déclaration de conformité
- 3 MicroLite : Généralités
- 4 Microphones lavalier
- 5 Microphones tour d'oreille
- 6 Microphones serre-tête
- 7 Raccordement du microphone
- 8 Utilisation
- 9 Nettoyage
- 10 Spécifications techniques
- 11 Guide des pannes
- 1 Generalidades
- 2 Declaración de conformidad
- 3 MicroLite: Descripción general
- 4 Micrófonos lavalier
- 5 Micrófonos de oreja
- 6 Micrófonos de diadema
- 7 Conexión del micrófono
- 8 Aplicación
- 9 Limpieza
- 10 Datos técnicos
- 11 Problemas de funcionamiento
MICROLITE MANUAL80
HEAdWORN MICROPHONES
The wind screen (W81, W82) is placed over the wire‑mesh grill to
shield the microphone from picking up wind outdoors. This ensures
the sound is clean and the microphone is optimally protected.
6.2.4 Make-up cover
Fig. 34: MUP81
Make-up cover for EC81 MD
Fig. 35: MUP82
Make-up cover for EC82 MD
The make‑up cover (MUP81, MUP82) is placed on the microphone
to protect it during the make‑up application process.
6.2.5 Protection against sweat
Fig. 36: Moisture shield
The headworn microphones are equipped with a patented moisture
shield that is attached to the wire frame.
The moisture shield prevents sweat and make‑up from penetrating
into the capsule area.
This prevents the microphone from being blocked, which could
lead to dull sound and lower microphone sensitivity.
Make-up cover
Protection
against sweat