Owners Manual
Table Of Contents
- 1 Allgemeines
- 2 Konformitätserklärung
- 3 MicroLite: Beschreibung allgemein
- 4 Lavaliermikrofone
- 5 Ohrbügelmikrofone
- 6 Kopfbügelmikrofone
- 7 Mikrofon anschließen
- 8 Anwendung
- 9 Reinigung
- 10 Technische Daten
- 11 Fehlerbehebung
- 1 General
- 2 Declaration of Conformity
- 3 MicroLite: General description
- 4 Lavalier microphones
- 5 Ear hook microphone
- 6 Headworn microphones
- 7 Connecting the microphone
- 8 Use
- 9 Cleaning
- 10 Technical data
- 11 Troubleshooting
- 1 Généralités
- 2 Déclaration de conformité
- 3 MicroLite : Généralités
- 4 Microphones lavalier
- 5 Microphones tour d'oreille
- 6 Microphones serre-tête
- 7 Raccordement du microphone
- 8 Utilisation
- 9 Nettoyage
- 10 Spécifications techniques
- 11 Guide des pannes
- 1 Generalidades
- 2 Declaración de conformidad
- 3 MicroLite: Descripción general
- 4 Micrófonos lavalier
- 5 Micrófonos de oreja
- 6 Micrófonos de diadema
- 7 Conexión del micrófono
- 8 Aplicación
- 9 Limpieza
- 10 Datos técnicos
- 11 Problemas de funcionamiento
MICROLITE MANUAL64
LAvALIER MICROPHONES
4.2.2 Lavalier clips
The MicroLite series offers three different lavalier clips for attaching
the microphone to clothing:
Fig. 4: H1
Magnet clip
Fig. 5: H2
Crocodile clip
Fig. 6: H3
Cable clip
The microphone is attached to the housing by the clasp on the clip:
This helps ensure the microphone cable is protected.
The cable clip is used to fasten the cable to the article of clothing.
The cable clip is used for the strain relief of the microphone cable.
4.2.3 Wind screen
Fig. 7: W81
Wind screen for LC81 MD
Fig. 8: W82
Wind screen for LC82 MD
The wind screen (W81, W82) is placed over the wire‑mesh grill to
shield the microphone from picking up wind outdoors. This ensures
the sound is clean and the microphone is optimally protected.
Lavalier clips
Wind screen