User's Manual

MANUAL MC9600 Del. no.
Ver. A0 Approved by:
Sheet 4 (9)
MICRO RUN
(NOT SIMULTANEOUS)
Set the selector for MICRO/NORMAL in position MICRO. The
micro-run movements are only at lowest speed in micro-run mode
irrespective of the deflections of the manipulator. The other functions
are working just as in ordinary runs. The manipulated movements are
looped so that only one movement can be operated at a time.
DUPLEX
The transmitter is the master in a duplex system. After every sent
message the transmitter requests an answer from the receiver. The
answer is shown on the display as a numerical value alternatively as a
diode lamp indication. Updating is made 22 times/second.
SIGNAL
A signal can be emitted at any time during the run and is obtained as
long as the push button switch is depressed.
STOP
Depress the STOP button for STOP.