Installation Guide
General Installation 
Steps given are for general installation only. If you require assis-
tance, please contact a plumber. 
1.  Take the included mounting bracket and mark the location of 
the screw holes. 
2.  Use a drill to prepare the floor for mounting. 
3.  Secure the mounting bracket to the floor with the included 
screws.  
4.  Use Teflon tape for the hot and cold water lines 
5.  Connect your water lines. 
6.  Check for leaks. 
Sub Floor Installation 
Depending on your home, subfloor installation is possible. Installa-
tion is the same as the steps given in the general installation. The 
mounting bracket will be secured directly to the subfloor. 
Tub Filler Installation 




