Installation Guide

Owner’s Manual

Freestanding Tub Filler

Office: +1 (626) 321-9834

Email: support@shoprangehoods.com

Distributed by ShopRangeHoods.com

Manufactured by AKDY

FOR RESIDENTIAL USE ONLY IN US & CA

WARRANTY VOID OUTSIDE US & CA

Revised 11/16

PAGE 2
Tools Required & Parts List Tools Required Tub Filler Parts List The following tools are recommended for installation:  Screwdriver  Adjustable wrench  Teflon tape  Drill  Hole saw Your tub filler comes preassembled ready for installation. A parts list is given if you require replacement parts: 1. Spout 2. Faucet 3. Cartridge 4. Handle 5. Post 6. Floor cap 7. Screws 8. Mounting bracket 9. Water supply lines 10. Flexible hose 11. Handheld shower (Picture shown may vary from the product.
PAGE 3
Tub Filler Installation General Installation Sub Floor Installation Steps given are for general installation only. If you require assistance, please contact a plumber. 1. Take the included mounting bracket and mark the location of the screw holes. 2. Use a drill to prepare the floor for mounting. 3. Secure the mounting bracket to the floor with the included screws. 4. Use Teflon tape for the hot and cold water lines 5. Connect your water lines. 6. Check for leaks.
PAGE 4
RETURNS & WARRANTY RETURNS, DAMAGES, MISSING PARTS We thank you for your purchase. If you are not satisfied with your purchase or have an issue with our product, please kindly let us know. Our full returns policy is outlined below. Carefully read over our terms before contacting us. If you have questions, our customer service team can be reached at: +1 (626) 321-9834 or support@shoprangehoods.com.