Installation Guide

ManualsBrandsAKDY ManualsAppliances30 in. Convertible Island Mount Range Hood in Stainless Steel with Tempered Glass and Touch Control

Owner’s Manual

Stainless Steel Range Hood

Island Mounts: Type A Only

Office: +1 (626) 321-9834

Email: support@shoprangehoods.com

Distributed by ShopRangeHoods.com

Manufactured by AKDY

FOR RESIDENTIAL USE ONLY IN US & CA

WARRANTY VOID OUTSIDE US & CA

Revised 06/16

INDEX

SAFTEY INFORMATION…………………………………………………………………………………………………2

TOOLS, PARTS, REQUIREMENTS……………………………….………………………………………………….3

RECIRCULATING (NON-VENTED) INSTALLATIONS…………………………………………………………4

CLEANING & MAINTENANCE…………………..…………………………………………………………………..5

INSTALLATION INSTRUCTIONS………………………………………………………………………………….6-8

ADJUSTING THE CLOCK………………………………………………………………………………………………..9

WARRANTY, DAMAGES, MISSNG PARTS….…………………………………………………………………10

Summary of content (10 pages)

PAGE 1
Owner’s Manual Stainless Steel Range Hood Island Mounts: Type A Only Copyright ShopRangeHoods.com© 2016 Office: +1 (626) 321-9834 Email: support@shoprangehoods.com Distributed by ShopRangeHoods.com Manufactured by AKDY FOR RESIDENTIAL USE ONLY IN US & CA WARRANTY VOID OUTSIDE US & CA Revised 06/16 INDEX SAFTEY INFORMATION…………………………………………………………………………………………………2 TOOLS, PARTS, REQUIREMENTS……………………………….………………………………………………….
PAGE 2
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, INJURY TO PERSONS, OBSERVE THE FOLLOWING: 1. Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer at the address or telephone number listed in the warranty. 2. Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally.
PAGE 3
TOOLS & PARTS REQUIREMENTS LOCATION REQUIREMENTS VENTILATION REQUIREMENTS  Electrical drill or ratchet driver  1/2” drill bit for drilling pilot holes  1¼” drill bit for drilling electrical wiring access hole  Screwdrivers: Philips & Straight blade  Pliers  Tape measure or ruler and pencil  Electrical supplies for wiring  Aluminum foil tape and/or HVAC tape  Hammer  Jigsaw or saber saw  Stud finder PARTS SUPPLIED  Body & Main Unit: 1 pc.  Chimney Mounting Bracket: 1 pc.
PAGE 4
Recirculating Installations & Carbon Filters Non-Vented (Recirculating) Installations Carbon Filter Care Guide Ordering Carbon Filters If it is not possible to vent cooking fumes and vapors to the outside, the hood can be used in the non-vented (recirculating version, fitting a carbon filter at the motor. Fumes and vapors are then recycled through the top grille. Do not block the chimney holes and vents on either side.
PAGE 5
Cleaning & Maintenance Cleaning Mesh or Baffle Filters Types of Metal Filters Interior Range Hood Cleaning Mesh and baffle filters can be cleaned with regular household dish washing soap and hot water. Please wear gloves while cleaning filters to protect against scrapes or cuts. Exercise caution around sharp metal edges and corners. Mesh The unit must be turned off before being cleaned. Also avoid spraying cleaner directly onto the light bulb or light bulb socket.
PAGE 6
AKDY Island Mount Range Hood: Type A (L-Brackets) Installation Steps: 1-8 For best results, please watch our accompanying installation video on YouTube: https://www.youtube.
PAGE 7
AKDY Island Mount Range Hood: Type A (L-Brackets) Installation Steps: 9-16 For best results, please watch our accompanying installation video on YouTube: https://www.youtube.
PAGE 8
AKDY Island Mount Range Hood: Type A (L-Brackets) Installation Steps: 17-24 For best results, please watch our accompanying installation video on YouTube: https://www.youtube.
PAGE 9
Adjusting the Clock Control Panel: Type A Control Panel: Type B Control Panel: Type C *If your control panel is not listed, please contact us at: support@shoprangehoods.com | +1-626-3219834. Clock Setting: Type A Step 1: Tap and hold for 3 secs. Step 2: Tap repeated to set the hour. Step 3: Tap to switch to mins. Step 4: Tap again repeatedly to set the mins. Step 5: Tap again to finish. Clock Setting: Type B Step 1: Tap and hold for 3 secs. Step 2: Tap repeated to set the hour.
PAGE 10
RETURNS & WARRANTY RETURNS, DAMAGES, MISSING PARTS We thank you for your purchase. If you are not satisfied with your purchase or have an issue with our product, please kindly let us know. Our full returns policy is outlined below. Carefully read over our terms before contacting us. If you have questions, our customer service team can be reached at: +1 (626) 321-9834 or support@shoprangehoods.com.