Installation Guide

USER INSTRUCTIONS
1. Any repairs to this appliance should be carried out by qualified / authorized
service personnel only.
2. Under no circumstances should this appliance be modified parts having to be
removed for servicing must be replaced with original “OEM “(original equip-
ment manufacturer) parts only.
3. This firebox is to be cleaned with a damp cloth (water) only.
4. Please unplug this firebox when not in use.
IMPORTANT: Always unplug the power cord before cleaning the unit. Do
not use any abrasive cleaners on the unit.
GENERAL INSTRUCTIONS
 Unpack the electric fireplace carefully and retain the packaging for possible
future use, In the event of moving or returning the fire to your supplier.
 The electric fireplace incorporates a flame effect, which can be used with or
without heat..
 Before connecting the electric fireplace, check that the supply voltage is the
same as that stated on the electric fireplace.
ELECTRICAL REQUIREMENTS
WARNING – THIS APPLIANCE MUST BE EARTHED
 This electric fireplace must be used on AC supply only and the voltage
marked on the electric fireplace must correspond to the supply voltage.
 Before switching on, please read the safety warnings and operating instruc-
tions.
WARNING: Electrical outlet wiring must comply with local building codes
and other applicable regulations to reduce the risk of fire, electrical shock and
injury to persons.
WARNING: Do not use this fireplace insert if any part of it has been under
water. Immediately call a qualified service technician to inspect the firebox and
replace any part of the electrical system which has been under water.
LOCATION REQUIREMENTS
 When choosing a location for your new fireplace, ensure that the general
instructions are followed. Also, for best effect install the fireplace out of di-
rect sunlight.
 It is safe to set the fireplace close to non-combustibles.
DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS
OR LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE.
Instructions & Requirements