Instructions / Assembly

INSTALLATION REQUIREMENTS
Tools Required
 Adjustable Pipe Wrench
 Adjustable Wrench
 Utility Knife
 Pliers
 Tape Measure
 Leveler
 Safety Shoes
 Safety Glasses
 Screwdriver
Materials Required
 Plumbers Putty
 Wall Coverings (as necessary)
 Silicone Sealant/Caulking
 Gypsum Cement (optional)
 Construction Adhesive (optional)
 Protective Covering for the Bathtub
 Nails
INSTALLATION NOTES
 Read the entire installation manual before beginning the installation. If installing a rim-mounted
faucet (only on certain models), make sure there is no interference with the overflow drain before drilling any holes.
 Position a protective covering or similar material in the bottom of the unit to protect the bathtub's surface from being scratched.
CLEARANCE REQUIREMENTS
 Measure the area where you intend to install the bathtub to ensure you have adequate space available for the installation.
SITE REQUIREMENTS
Sub-floor Preparation
 Check the flooring where the bathtub is going to be installed and make repairs as needed. Make sure the sub-floor is level. It is strongly recommended to pre-
pare a waterproof layer for the sub-floor beforehand.