MINI 06 Feel the power, aesthetics and attraction AKDAL MINI 06 OWNER’S MANUAL
MINI 06 CONGRATULATIONS You are the owner of one of the AKDAL pistols that combined with the art and high quality. AKDAL pistols have all important features that any shooter can require. Used with the proper ammunition and performed appropriate maintenance, it will serve you for many years. To be able to get the best performance and reliability from your pistol, please read and follow all explanation and warnings carefully in this manual.
MINI 06 CONTENTS CONGRATULATIONS..........................................................................................................................2 INSTRUCTIONS...................................................................................................................................4 SAFETY REGULATIONS.....................................................................................................................5 TECHNICAL SPECIFICATIONS.................................................
MINI 06 INSTRUCTIONS • Please read these instructions carefully before every handling of any AKDAL pistol. • Do not use your pistol until you have fully understood all the safety instructions and it’s handling procedures. Information and specifications contained within this manual may change without notification. • Ensure that you always comply with the local and national laws that govern ownership, carrying and use of firearms.
MINI 06 SAFETY REGULATIONS • Always keep the muzzle of the pistol pointed in a safe direction. A safe direction is defined as towards an area where there are no people, other life forms or other people’s property. Never aim at yourself or other life forms, even the pistol is unloaded. • Never use the pistol under the influence of drugs or alcohol, while ill or suffering other such difficulties.
MINI 06 • When storing a firearm, the firearm should be unloaded, secured in a safe storage case, and out of the reach of children and untrained adults. • In case the manual safety proves to be ineffective for any reason, danger of an unintentional discharge exists. The weapon is then to be immediately unloaded and, restricted from further use make sure that your weapon is properly repaired and checked by ucyildiz arms or certified armorer before using it again.
MINI 06 TECHNICAL SPECIFICATIONS Model Caliber Operation Weight (empty) Overall Length Height Width Barrel length Sight radius Muzzle Velocity Rifling Max effective range Magazine weight (empty) Magazine capacity Trigger principle Trigger pull : MINI 06 : 6,35 mm - .
MINI 06 PISTOL DESCRIPTION 8 Feel the power, aesthetics and attraction
MINI 06 FUNCTION CHECKS Before the check, ensure that the magazine is empty and there is no round in the chamber. 1. Remove the magazine. Draw the slide assembly all the way back and then release it. -- It must be returned to its front position by the recoil spring. 2. Insert the empty magazine; draw back the slide assembly to the stop. -- The slide assembly must be arrested in the rear position. 3. Press the magazine release lever backward and remove the magazine.
MINI 06 HANDLING THE PISTOL LOADING THE MAGAZINE 1. Press down on the magazine follower with the cartridge case rim. 2. Push the cartridge to the rear and down the magazine lips. 3. Continue until the magazine holds the desired number of cartridges. LOADING THE PISTOL 1. Point the pistol in a safe direction. 2. Insert loaded magazine and check that the magazine catch engages. 3.
MINI 06 RELOADING DURING SHOOTING When the magazine is empty, the slide is held at the back open. Press the magazine release lever backward and remove the empty magazine. Slide goes forward position by return spring force. Insert a loaded magazine and draw back the slide and allow it to fly forward. The pistol is again loaded and ready to fire. UNLOADING THE PISTOL 1. Pointing the pistol in a safe direction. 2. Keep your finger off the trigger and remove the magazine. 3.
MINI 06 DISASSEMBLED VIEW 1. Slide 2. Return spring guide 3. Return spring 4. Frame 5.
MINI 06 FIELD STRIPPING Do not disassemble the pistol any further than shown here. Further stripping, incorrect reassembly and non-compliance with the field stripping instruction shall exempt the manufacturer from any warranty claims for to injury or damage. 1. Point the pistol in a safe direction and keep finger off the trigger and out of the trigger guard. 2. Depress the magazine catch and remove the magazine 3.
MINI 06 4. Release the slide and let it move forward. 5. Hold pistol in the right hand: with left thumb rotate dismantling lever clockwise until it stops. 6. Press dismantling lever pin with right hand’s forefinger from the right side of the pistol and remove it. 7. Pull the slide assembly all the way back and lift it’s rear end up.
MINI 06 8. After lifting the rear end of the slide release it forward. CAUTION! At this position the recoil spring is under tension, so be careful during the forward movement of the slide assembly. 9. The pistol is now field stripped. Further disassembly is not required for normal cleaning and maintenance. 10. As with most firearms, reassembly is carried out in the reverse order of disassembly.
MINI 06 PART LIST NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 38 39 16 CODE 2409003 2009018 2009017 2009020 2009019 2009117 2009118 2009001 2409016 2009028 2009024 2009022 2009021 2009040 2009039 2009037 2009069 2409041 2009065 2009063 2409029 2409122 2009121 2009123 2409098 2009105 2009100 2009076 2009077 2409034 2009033 2009016 2009008 2409042 2409043 2409038 2409036 2409041 2409017 2120122 2120172 PART NAME FRAME MAIN SPRING PUSHING PI
MINI 06 TROUBLESHOOTING Malfunction Cause Correction Feeding: No round fed into the chamber Magazine not properly inserted or maga- Insert magazine properly or change zine is deformed or dirty magazine Slide does not close easily or completely Pistol or cartridge is fouled (dirty) or pis- Clean and lubricate pistol and/or replace tol is too heavily lubricated Pistol requires the ammunition service Return to Ucyildiz Arms Extraction/Ejection: After firing, the case stays in the chamber Insufficient re
MINI 06 TRANSPORTATION AND STORAGE TRANSPORTATION • For your own safety and the safety of others, always transport the pistol unloaded, decocked and under lock. • Never carry the pistol on you with a round in the chamber and the hammer cocked. • Always carry the pistol so that if you fall, slip or something similar happens, you always have the direction of the muzzle under control. • Transport the pistol separate from the ammunition.
MINI 06 WARRANTY STATEMENTS Important information! Please read and understand the warranty statement. Based on UCYILDIZ ARMS Inc. offers no express warranty on their product line. However, UCYILDIZ ARMS Inc. recognizes its obligations concerning service to owners of AKDAL pistols. UCYILDIZ ARMS Inc. always stands behind its products and will continue to provide service to their product line as they have over the years. UCYILDIZ ARMS Inc.
MINI 06 Feel the power, aesthetics and attraction Ucyildiz Arms Ltd Inc. Bostanci Cd. Yol Sk. No:14/A 34775 Y. Dudullu, Umraniye / Istanbul - Turkey Tel : +90 (216) 527 6710 Fax : +90 (216) 527 6705 E-Mail : blow@voltranarms.com info@voltranarms.com Web : www.voltranarms.
