User manual

7
Disconnecting the INTEGRAL eSATA (USB mode)
WARNING!
Close all windows and quit all running applications that are stored on the Integral P2SATA External Drive before
switching off the enclosure or unpluging the USB or power cables.
NOT DOING SO MAY RESULT IN LOSS OF DATA!
Windows 2000/XP/VISTA
1.
Double-click on the [Unplug arrow icon or Eject
Hardware] icon in the system tray. Dialog box appears
as on the right.
2.
Highlight the [USB Mass Storage Device] in the
dialog box, click on [Stop], choose the USB2.0 External
Drive that you want to disconnect, then click on [Stop]
again on next screen.
3.
Wait for few seconds, the system prompts “You may
safely remove this device”.
4.
You can now safely switch off the enclosure or unplug
the USB cable from the USB port of the computer.
Mac OS
1.
Drag Integral P2SATA External Drive’s icon into "Trash"
2.
MAC OS will dismount the external drive from the
Desktop
3.
You can now safely switch off the enclosure or unplug the
USB cable from the USB port of the MAC.
USB Connection