User manual

7
Network Connection Mode
Hardware installation
Connect INTEGRAL LAN to Network:
1. Connect one end of the included Ethernet cable to the Ethernet port on the INTEGRAL LAN
and the other to a switch or router. (100 Base-T).
2. Make sure the power adaptor connector is firmly attached to the INTEGRAL LAN and to a power
source.
3. Switch ON the INTEGRAL LAN.
Computer 1 Laptop 1 Computer 2
AC Power
Ethernet Switch
Ethernet Cable
Ethernet Switch Example
AC Power
Ethernet Cable
Wired/Wireless
Ethernet Router
Computer 1 Laptop 1 Wireless
Laptop 2
Ethernet Router Setup Example
INTEGRAL LAN
INTEGRAL LAN
Network Connection
CAUTION! Do not connect
USB cable and Ethernet
cable at the same time.