User manual

Introduction

Congratulations on your purchase of the INTEGRAL LAN 3.5” hard disk enclosure. This User Manual is

intended to help you install the INTEGRAL LAN drive quickly and easily onto your Personal Computer or

Ethernet Network and begin using it immediately. INTEGRAL LAN drives are the perfect solution to your

network storage needs. Share documents, music, videos, and pictures with your family or co-workers through

your network. Simply connect the drive to your network, install our easy to use software and you’re up and

running. Say goodbye to confusing network setups and conﬁgurations. With its Key Code security features,

your data is kept private from unauthorized access.

The INTEGRAL LAN works in both network mode as well as a standalone USB mode. Take advantage of the

ultra fast USB 2.0 transfer rates by connecting the INTEGRAL LAN directly to your MAC's USB 2.0 port. With its

portability, ease of use, high performance, and extra capacity, the INTEGRAL LAN has you covered.

Package Contents

• INTEGRAL LAN enclosure

• USER Manual

• Software & Driver CD

• Power Adapter

• USB & Ethernet Cables

• Footstand

System Requirement

• Mac OS X 10.3 or greater

• 128 MB RAM (256 MB recommended)

• USB 1.1 Port (USB 2.0 recommended)

• CD-ROM drive for installation

• 100Base-T full duplex switch for NDAS mode

Features

• Support 3.5” IDE HDD (PATA)

• Shared network direct attached storage (NDAS) for your home or ofﬁce

• Easy setup and installation

• Sleek & portable design

• USB 2.0 (USB 1.1 backwards compatible)

• Key Code security protection

• Driver supports

OS X 10.3 or greater

(Network Mode)

• OS 8.6 or later (USB Mode)

• Data transfer rates of:

▎

Network mode: 100Mbit/sec

▎

USB mode: 480Mbit/second