User manual

Managing the INTEGRAL LAN disk

Click on the icon for

registering a new LAN

enclosure device

Click on the icon for unregistering

an already registered LAN enclosure

device

The INTEGRAL LAN disk can be accessed as read only

or read/write. In read only mode, any number of users

or applications can read from the disk. In Read/Write

mode, only one user or application can write to the

disk at a time.

To change from read only mode to read/write, click on

the menu in conﬁguration and select read/write, and

vice versa for changing from read/write to read only

mode. The conﬁguration menu allows unmounting of

the disk.

Note: The Write Key is required during device

registration for the read/write mode to work.

Network Connection

Sharing the INTEGRAL LAN on a Network

Once INTEGRAL LAN drive is connected to your network, it can be accessed from any computer on your LAN.

To share your INTEGRAL LAN device, you need:

• All computers and INTEGRAL LAN drive to be on the same LAN

• INTEGRAL LAN device connected via Ethernet Router

• NDAS device must be registered onto each computer

The INTEGRAL LAN can be shared by a mixed of Windows 2000/XP and Mac computers. Multiple computer

can have READ ONLY access simultaneously. WRITE ACCESS is assigned to one computer at a time and is

passed from one computer to another. The

disk ﬁle system format must be formatted in FAT32. The NTFS

ﬁle system for windows 2000/XP is not a compatible ﬁle system for the Mac OS.

Accessing the INTEGRAL LAN disk

WARNING:

DO NOT perform disk operations (format, partition and chkdsk) when the INTEGRAL LAN drive are mounted

by multiple computers.