User Guide

Chapter 8 : Q-Link slider  44
Setting the slider  44
Recording the slider value in a sequence  44
AFTER key  44
Chapter 9 : Using the MPC1000 with external devices  45
Sync with the MPC1000 as the master  45
Sync with the MPC1000 as the slave  45
Connecting the MPC1000 to the MIDI keyboard with the sound module  46
Setting the MIDI input  47
Chapter 10 : Recording a sample  48
Recording the sample - detailed information  50
Recording the digital signal  50
Recording the MAIN OUT  50
Other features  51
Chapter 11 : Editing a sample  52
Setting the start/end points for the sample  52
Deleting an unnecessary part from a sample (DISCARD)  53
Saving part of a sample as a new sample (EXTRACT)  54
Sample window features  54
Other editing functions  55
Setting the loop  56
Linking the loop point to the start point  57
Chapter 12 : Program  58
Creating a program  58
Assigning/Reassigning samples to the pads  58
Playing the sample while the pad is being hit  59
Setting the volume and the tuning for a sample  59
Changing the sample volume with velocity  59
Playing several samples with one pad  60
Switching between samples using velocity  60
Setting the envelope for a pad  61
The functions in the Program window  61
Editing the sound of a sample  63
Simulating the open/close hi-hat (setting the mute group)  64
Setting the overlap of the sounds on the same pad (voice overlap)  64
Delete all the unused samples at the same time (PURGE)  64
Setting a MIDI note number to the pads  65
Assigning MIDI note numbers to the pads (changeing the default setting)  66
II