Operator`s manual

Chapter 4: Editing Sequences
Page 98
Pressing this soft key causes the above-specified transposition to be
made permanent by actually changing each of the note events within the
specified region of the sequence. After this operation, the Amount field is
reset to 0 and the transpose light goes off.
Transposing in Real Time While Playing
To transpose a sequence in real time while playing, follow these steps:
1. Play the sequence.
2. Press the TRANSPOSE key.
3. Make sure the Track field is set to 0.
4. Locate Middle C on the keyboard. Pressing any key above Middle C
will instantly transpose the sequence up by an amount equal to the
interval between the new key and Middle C. Pressing any key below
Middle C will instantly transpose the sequence down by an amount
equal to the interval between the new key and Middle C. When you
press the transposition key, it will only be used to set the transposition
interval—the note itself will not sound. Be sure to press the key
immediately before the instant that you want the transposition to
occur. To remind you that your sequence is being transposed, the
light above the TRANSPOSE key will go on if any Amount value other
than 0 has been selected.
5. To return to the original key signature, press Middle C or set the
Amount field to 0.