Operator`s manual

Chapter 4: Editing Sequences
Page 94
3. ALL EXCEPT: This option is similar to ONLY VIEW, detailed
above, except that all event types except
the event displayed
to the right of the words ALL EXCEPT are displayed.
Step Recording
Step Edit also makes it possible to record new notes from a MIDI
keyboard while the sequence is not playing. To record a note while in
Step Edit mode, move to the desired position within the sequence, then
play and release the desired note on the MIDI keyboard. This note will
then appear as the new active event, with its pitch, velocity, release
velocity, and duration displayed numerically. The duration of the note is
taken from the actual duration played, relative to the current tempo.
However, if the Duration of recorded notes field in the Step Edit Options
screen is set to SAME AS STEP, The duration always defaults to the
current step value.
If the Auto step increment on key release field in the Step Edit Options
screen is set to YES, the current position within the sequence will
automatically advance one step forward when the newly recorded note
(or chord) is released. This allow you to, for example, record a series of
notes (or chords) one at a time while stopped, and automatically play
them back with evenly spaced timing. To do this:
1. Set up your sequence and track for recording from your MIDI
keyboard as you would to record in real time.
2. In the Timing Correct screen, set the Note value field to the
desired step value.
3. Rewind to the start of the sequence.
4. Press STEP EDIT.
5. Press SOFT KEY 4, <Options>.
6. Set the Auto step increment on key release field to YES.
7. Press STEP EDIT again.
8. Play a series of notes (or chords), one at a time.
9. Press PLAY START. The notes you have just entered will play
back with evenly spaced timing.