Manualshelf

Operator`s manual

ManualsBrandsAkai ManualsComputer equipmentHV 10
31323334353637383940
25
COMBI (nation) PEDAL
When the footswitch of the following circuit diagram is connected to the FOOTSWITCH ON/OFF
(COMBI), it can be used to switch between the PROGRAM A and PROGRAM B or to control the
BYPASS ON/OFF.
ON/OFF
A
B
COMBI PEDAL
Operation Using MIDI
Program Change
The Program can be switched by receiving the MIDI Program Change information.
The Program Change information corresponds to the BANK and PROGRAM A/B in the following
way.
Program Change 01 > 01A
•
•
Program Change 50 > 50A
Program Change 51 > 01B
•
•
Program Change 100 > 50B
✽ The Program Change numbers higher than 101 are ignored.
Note: The MIDI channels of the DecaBuddy and the external MIDI device that transmits the
Program Change information must be set the same (refer to MIDI SYSTEM in GLOBAL
parameter).
Control Change
The following parameters can be controlled by receiving the MIDI Control Change information.
Control Change 07 > LEVEL (0~127)
Control Change 10 > PAN (0~127)
Control Change 11 > MASTER LVL. (0~127)
Control Change 12 > FORMANT (0~127)
Control Change 13 > P. CORRECT (0~127)
Operation Using MIDI