Operation Manual

13
9 Television Installation
Connect antenna or video facility
1. Use 75Ω coaxial cable plug or 300-75Ω impedance converter to plug in antenna input terminal on
the rear of the cabinet.
2. Connect the video facility to the audio, video in jack on the rear of the cabinet.
Battery installation and replacement for remote control unit
The remote control uses two 1.5V AA batteries. For battery installation and replacement are as following:
1 Turn the remote control unit upside down. Press
down the grip of battery compartment and slide
the color in the direction of the arrow.
2 Install two new batteries, make sure that
battery polarity matches with the “+”, “–”
marks inside the battery. Or not it could
damage the unit.
3 Close the battery compartment covers
75 Ω Co-axis cable
Antenna in jack
75 Ω Co-axis cable
VHF antenna
Mixer
UHF antenna
Input terminal of antenna
Co-axis antenna plug