Operating manual Professional Belt Driver USB Turntable ATT01U Operating manual (GB) 41-50
IMPORTANT CAUTION DO NOT OPEN RISK OF ELECTRIC SHOCK CAUTION: To reduce the risk of electric shock, do not remove any cover. No user-serviceable parts inside. Refer servicing to qualified service personnel only. This symbol is intended to alert you to the presence of dangerous voltage inside the product that presents a risk of electric shock. Do not open the product’s case.
SAFETY INSTRUCTIONS • Read Instructions - All the safety and operating instructions should be read before the appliance is operated. • Retain Instructions - The safety and operating instructions should be retained for future reference. • Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. • Follow Instructions - All operating and use instructions should be followed.
CONDENSATION When the turntable is brought into a warm room from previously cold surroundings or when the room temperature is suddenly increased, condensation may form inside and the turntable may not be able to attain its full performance. In cases like this, use the turntable after allowing it to stand for about an hour or after raising the room temperature gradually. NAMES OF PARTS 3 5 2 4 12 6 7 11 10 8 9 AC 14 13 1 1. AC power cord 8. SIZE select (30/17) 2. Turntable platter 9.
BEFORE OPERATION 2 1 A A C B 4 3 5 ASSEMBLY p Place the mat on top of the platter. q Remove the tie securing the tonearm. r Remove the stylus guard. Please install the accessory turntable on the main unit. n Hold the ribbon tape A which is attached to the turntable belt B and loop the belt over the motor pulley C. Be sure it does not twist. o Pull the ribbon tapes A out of the turntable belt B.
OPERATION A 1 2 4 30 2 s iz 3 4 7 3 7 B Automatic Play (A) B • 30-cm (12”) LP records and 17-cm (7”) EP records can be played automatically. 1. Open the dust cover. 2. Place the record on the player • Place the EP adaptor over the center spindle when playing 17-cm (7”) EP records. 45 or 33. 3. Set the SPEED button to 4. Set the SIZE selector to 17 or 30. 5. Close the dust cover. 6. Set the input selector on the amplifier. 7. Press the START button. 8. Adjust the volume control on the amplifier.
Cleaning the stylus A A dirty stylus will cause noise and poor sound quality. Use a stylus cleaning kit and brush off the dirt in the direction of the arrow. Do not brush in the opposite direction or from side to side, since this can damage the stylus. Replacing the stylus B When the sound quality drops, replace the stylus with a new one. Remove the old stylus by pulling it downwards gently, and push the new stylus into place as shown.
AUDACITY SOFTWARE OVERVIEW Audacity is free software, licensed under the GNU General Public License(GPL). More information as well as open source code can be found on the web at http://audacity.sourceforge.net/ Note : Please ensure you have installed the software before starting. Setting up your PC to work with Audacity 1. Connect an input source to the unit 2 Connect the USB lead to your computer 3. Install the Audacity recording software 4. Open the Audacity program 5.
AUDACITY SOFTWARE OVERVIEW Recording Albums with Audacity 1. Saving a project • Audacity writes all the changed and recorded audio to a directory called Projectname_data, which is located right where you saved the project file itself • Thus, select Save project as from your Audacity File tab and choose a location and filename for your project • Please note that when you startup Audacity fresh, only the “Save As...” menu option is available. 2.
SPECIFICATIONS GENERAL Model: Dimension: Weight: Power supply: Power consumption: TURNTABLE SECTION Type Motor Driving method Turntable platter Speeds Wow and flutter S/N ratio Speed tolerance USB function ATT01U Professional Belt Drive USB turntable 350(W) x 348(D) x 95.4(H)mm 2.47 kg AC230V/50Hz 3W 2-speed full-auto DC motor Belt drive 195 mm dia. Plastic 331/3 and 45 rpm Less than 0,25% (WTD) at 3KHz (JIS) More than 50dB (DIN-B) 3000Hz +3%,-2% USB rec. function A/D, D/A 16 bit 44.
