User manual

9
APRTC41U
To select an extra signal source (CD, USB), press and hold the PLAY/PAUSE
button (13).
● To adjust the volume level, turn the VOLUME dial (2) until the desired level
is set.
To enable the enhanced bass, press the DBBS button (5). Press the
button again to disable the enhanced bass.
To connect an external audio device, insert the cable plug in the AUX IN
jack (4).
Radio functions5.3
Switch on the appliance. Select the tuner mode.
To select the radio band, slide the AM/FM switch (14) to the AM or FM position.
To select a frequency or radio station, turn the TUNING dial (16) until the
desired frequency is set.
i
To improve the reception of the FM frequency, extend the aerial
antenna. To improve the reception of the AM frequency, turn the
appliance.
CD functions5.4
Switch on the appliance. Select the CD mode.
To insert a CD:
Press the CD compartment (6) to open the appliance.
Insert the CD with the label upwards.
Close the CD compartment (6).
The display shows the total number of tracks on the CD.
To start playback, press the PLAY/PAUSE button (13) once.
During playback, the following functions are available:
To select a track, press the PREV button (10) or the NEXT button (11)
until the desired track is set.
To search for a specic point on the disc, hold the PREV button (10) or the
NEXT button (11) until the point is reached and release the button.
To pause playback, press the PLAY/PAUSE button (13) once; to resume
playback, press the button again.
To stop playback, press the STOP button (12).