User manual

12
During playback, the following functions are available:
● To pause playback, press the PAUSE button (19) once. Press it again to
resume playback.
● To forward the tape, press the F.FWD button (21).
● To rewind the tape, press the REW button (22).
● To stop the tape, press the STOP/EJECT button (20).
Recording
● If the source device is CD, insert the source device.
● If the source device is the tuner, switch on the tuner.
● Press the REC button (24) to start recording
● Press the STOP/EJECT button (20) to stop recording.
Cleaning and maintenance6.
!
WARNING
Before performing any cleaning or maintenance, switch off and
unplug the appliance.
● Clean the outside of the appliance with a soft cloth. When the appliance is
very dirty, dampen the cloth slightly with water and a neutral solution.
● Clean the lens with a camera lens brush/blower (not included) if the lens
is dirty.
Handle and care of a disc6.1
● Hold the disc with ngers. Hold the disc outer edge and/or the centre
spindle hole. Do not touch the disc surface.
● Do not bend or press the disc. Do not expose the disc to direct sunlight or
heating sources.
● Clean the disc surface with a soft, dry cleaning cloth. Wipe the disc
surface gently, radially, from centre towards the outer edge.
● Do not apply thinner, alcohol, chemical solvent, or sprays when cleaning.
Such cleaning uids will permanently damage the disc surface.