User Manual

After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | tempo.org/support
13
Display icons and indicator lights (Fig. 5)
Instructions (Cont.)
Table 1: Display icons
SY-DH80S5UW-001
SY-DH80S5UW-001
Shows the program duration and remaining time (in hours:
minutes counted down), delay time (in hours counted down) and
error codes.
SY-DH80S5UW-001
SY-DH80S5UW-001
The buzzer light illuminates when the buzzer is set to on. If the
symbol is crossed out, the buzzer is muted.
SY-DH80S5UW-001
SY-DH80S5UW-001
The delay start light comes on when a delay start has been set.
SY-DH80S5UW-001
SY-DH80S5UW-001
The anti-crease light indicates that the appliance is in the anti-
crease phase.
SY-DH80S5UW-001
SY-DH80S5UW-001
The child lock light indicates that the child lock has been set.
SY-DH80S5UW-001
SY-DH80S5UW-001
SY-DH80S5UW-001
SY-DH80S5UW-001
SY-DH80S5UW-001
SY-DH80S5UW-001
The drying type lights indicate which drying level has been set.
SY-DH80S5UW-001
SY-DH80S5UW-001
The Wi-Fi indicator flashes rapidly when the unit is ready for
configuration with your mobile device. It illuminates steadily
when the Wi-Fi function is working.
The drying light indicates the appliance is in the drying phase.
The cooling light indicates the appliance is in the cooling phase.
(A two minute cooling phase follows the drying phase.)
SY-DH80S5UW-001
SY-DH80S5UW-001
The end of program light comes on after the cooling phase.
SY-DH80S5UW-001
SY-DH80S5UW-001
The filter light comes on every cycle to remind you that the filter
must be cleaned at the end of the program.
The tank full light comes on after each program (and also when
the water tank is full) to remind you to empty the water container.
NOTE: Empty the water container after each use to avoid
triggering an alarm during the next use.