Instruction Manual

11
11
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | tempo.org/support
• Open the fridge door and locate the water tank between the top and bottom door
balconies.
• Remove the water tank, and remove the attached lid (Fig. 7).
• Wash both the tank and lid with lukewarm water, a soft cloth and a neutral/mild soap/
detergent. Rinse and dry thoroughly.
• Wipe the dispenser lever on the outside of the fridge door with a soft cloth and warm,
clean water.
CAUTION: Do not use harsh or abrasive detergents or powders.
• Replace the water tank, then re-attach the lid and balcony (Fig. 8). Check the water
tank position to ensure it is properly assembled
• Further rinse the dispenser by dispensing 5-6 cups of water to ensure that any residue
is removed before further use (see dispensing instructions below). Discard this water.
NOTE:
• After a long period of non-use, the water tank must be disassembled and cleaned
before refilling.
• The water tank must be completely emptied before it is disassembled.
Water Dispenser
The refrigerator is equipped with a water dispenser
located in the door (Fig. 6), which allows for
convenient access to chilled water at the touch of a
button.
Cleaning the Water Dispenser
Before using the water dispenser for the first time,
remove and clean the water tank. It is reccomended
that you clean the water dispenser components
every 3 to 6 months, depending on how often it is
used.
Fig. 6
Fig. 7
Fig. 8
Operating Instructions (Cont.)