Instruction Manual

After Sales Support

(AU) 1300 886 649 (NZ) 0800 836 761 | tempo.org/support

Instructions

Temperature control

• The control for regulating the temperature in the

refrigerator (Fig. 4) is located inside of the fridge,

on the upper right hand side. The higher the

number on the dial, the colder the temperature

in the refrigerator compartment (i.e. [ 0 ] is the

warmest setting and [ 7 ] is the coldest).

• The first time you turn the unit on, set the

temperature control to the coldest position [ 7 ].

Fresh food storage tips

The refrigerator compartment is suitable for short-term storage

of fresh food. It has three adjustable door balconies, a crisper

drawer and crisper drawer cover, as well as two adjustable

shelves (Fig. 5). The temperature inside this refrigerator varies

depending on the amount of food stored and the frequency of

door opening.

• Do not overload the fridge.

• Keep enough space around items for cold airflow.

• Do not block ventilation openings. Do not place items directly against the back wall.

• Let hot food cool down to room temperature before storing them in the fridge.

Otherwise the cooling capacity will be affected and power consumption increased.

Hot items may also affect the plastic parts inside the appliance.

• If necessary, wipe containers clean and dry before storage in the refrigerator.

• Cover cooked foods and use sealed containers or storage bags to prevent food

from drying out, losing its taste or taking on aromas from other foods.

• Store butter and cheese in airtight containers, or wrap them thoroughly.

• Make sure milk bottles are properly closed before storage on a door balcony.

NOTE: this will most likely bring the interior temperature of the freezer to below 0°C.

After 24 to 48 hours, adjust it to the setting that best suits your needs – a middle setting

(at position 3–4) should be appropriate in most cases for general operation.

• To turn the appliance off, first turn the temperature control to the minimum position,

which will stop the cooling cycle, then disconnect the power supply cord from the

wall outlet in order to shut off power to the unit.

NOTE: The unit may not work at the set temperature on particularly hot days, or if the

door is opened too frequently. To ensure efficient operation, do not open

the door unnecessarily or for prolonged periods of time.

NOTE: If the unit is unplugged, turned off or has lost power, you must wait five

minutes before restarting the unit.

Fig.5

Fig.4