SAFETY INSTRUCTIONS The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to cause an electric shock.
IMPORTANT SAFETY INSTRUCTIONS SAFE USE OF YOUR EQUIPMENT Here are a few tips to help you do this: READ this instruction manual before you attempt to use the equipment. NEVER fit make shift stands or legs with woodscrews. Use only approved supports and fasteners specially designed for the equipment.
TABLE OF CONTENTS Safety Instructions .................................. 2 Important Safety Instructions................. 3 Table of Contents .................................... 4 Disc Formats ............................................ 5 Accessories ............................................. 6 Remote Control........................................ 6 Control Reference Guide ...................7 - 8 Special Function ................................... 16 Display function ...............................
DISC FORMATS The unit can playback discs bearing any of the following marks: DVDs [8cm(3")/12cm(5") disc] Compatible Audio CDs [8cm(3")12cm(5") disc] Region Management Information Region Management Information: This unit is designed and manufactured to respond to the Region Management Information that is encoded on DVDs. If the region number printed on the DVD does not correspond to the region number of this unit, this unit cannot play that disc. The region number of this unit is 2.
ACCESSORIES Please check and identify the supplied accessories. Remote control (with batteries) ........................................................................................x 1 Audio/Video cable ............................................................................................................x 1 AM (MW) Loop antenna ...................................................................................................
CONTROL REFERENCE GUIDE Remote Control 9) 10) 11) 12) 13) 14) 15) 16) 17) 18) 19) 1) 2) 3) 4) 5) 6) 7) 8) 20) OPEN/CLOSE button Use to open or close the disc tray. I / STANDBY/ON button Turn the unit on and puts it in standby mode. DISPLAY button Change disc status information displayed on the TV screen. TITLE Display DVD title menu. RETURN button Return to the normal operation after using the SETUP menu.
CONTROL REFERENCE GUIDE Front and Top Panel 1 1) 2) 3) 4) 5) 2 3 4 5 6 7 8 9 10 11 6) PLAY Button Press to start or resume playback of a disc. 7) STOP Button Stops playing a disc. Switches between FM and MW. 8) FUNCTION Button Selects the source. 9) STANDBY/ON Button Turns the unit on and puts it in standby mode. 10) Remote Sensor Receives the remote control unit signals. 11) VOLUME Control Adjusts the volume level. Disc Tray Opens or closes the disc tray by pushing the OPEN/ CLOSE button.
CONNECTIONS For Better Reception FM Antenna AM (MW) Loop Antenna (supplied) FM Fully unwind the wire antenna and position it for the best reception. MW Fully unwind the rotate the loop antenna then position it for the best reception. A. Connecting your TV The unit can be connected to your TV in several different ways, depending on the design of your TV. Notes: • Connect the unit directly to your TV.
CONNECTIONS SCART cable TV To SCART INPUT SCART Cable (not supplied) Note: Press the SETUP button and select Video Out to RGB. (Please see CUSTOMIZING THE FUNCTION SETTINGS.) Component video cable (good quality) Some TVs or monitors are equipped with component video inputs. Progressive output (DVD) Some TVs or monitors are equipped with Component Video inputs that are capable of reproducing a progressively scanned video signal.
CONNECTIONS B. Connecting a VCR Yellow Red White Audio/Video Cable (supplied) VCR Yellow Red White White Red Yellow TV White Red Yellow Audio/Video Cable (not supplied) Watching a videotape 1. Turn on the unit. Use the FUNCTION button on the remote control or the front panel to select "AV IN". 2. Turn on your TV and follow the instructions included with it to select the VIDEO function which corresponds to the VIDEO IN jack that is connected to the main unit. 3.
CONNECTIONS D. Positioning the Speakers and Subwoofer FRONT SPEAKERS Place on both sides of the TV, equal distances apart. CENTER Place on the top of or below the TV. REAR SPEAKERS Place right beside or slightly behind your listening position, and a little higher than your ears. SUBWOOFER Can be placed anywhere. E. Connecting the Speakers and Subwoofer 6 speaker wires supplied. Both ends of each speker wire are colour marked. 1.
CONNECTIONS Plugging in the Unit • Ensure all the components and speakers are connected correctly. • Be sure the AC power cord is disconnected and all functions are off before making connections. • When you are not going to use the unit for a long period of time, disconnect the power cord. Turning on the Unit and TV 1. Plug in the unit. The unit is on standby and the standby indicator lights up. 2.
PLAYING A DISC Basic playback This owner’s manual explains the basic instructions for operating this unit. Some DVDs are produced in a manner that allows specific or limited operation during playback. Therefore, this unit may not respond to all operating commands. THIS IS NOT A DEFECT. Please refer to the instructions accompanying the specific DVD in question for more information about the options available on that DVD. ” may appear on the screen during operation.
PLAYING A DISC Basic playback Slow-motion play (DVD) 1. Press the SLOW button on the remote in play mode. • Four speeds are available. Each time the SLOW button is pressed, the speed of slow-motion playback changes in the following sequence: 2. Press the PLAY button to return to normal playback speed. Audio Selection On some discs, the sound is recorded in two or more formats. Follow the directions below to select the type of playback. 1.
SPECIAL FUNCTION DISPLAY function Using the DISPLAY button, you can check the current settings of the following items: Time, Title/Chapter, Audio, Subtitle and Angle. Locating a Specific Title/Chapter/Time If a DVD contains title/chapter/time numbers, you can locate a specific title/ chapter/time by directly selecting a title/chapter/time number. 1. Press the GOTO button to display Title. 2.
REPEAT PLAYBACK You can play a specific title or chapter repeatedly. (Title repeat, chapter repeat, A-B repeat) (DVD) Repeating a Chapter You can play the same chapter repeatedly. 1. While the disc is playing, press the REPEAT DISC button until the “ screen. The current chapter is played repeatedly. ” indicator displays on the Repeating a Title You can play the same title repeatedly. 2. While the disc is playing, press the REPEAT DISC button until the “ The current title is played repeatedly.
DVD PROGRAMMABLE MEMORY DVD Programmable Playback You can combine your favorite titles/chapters and play them in the order you determine. 1. Press the MEMORY button on the remote control. 2. Use the or button to select the title you want, then press the OK button on the remote control to confirm. 3. Use the or button to select the chapter you want, then press the OK button on the remote control to confirm. 4.
PLAY MODES FOR CD OR JPEG DISC When playing CD/JPEG discs, you can modify the Play Modes through the Toolkit which appears on the right side of the window. Press the or button on the remote control to navigate between the left/right windows and the or button on the remote control to select files/tracks or play mode items. Then press the OK button. CD Track/JPEG File Programmed Playback 1. Use the and buttons to select "Edit mode" then press the OK button. 2.
CUSTOMIZING THE FUNCTION SETTINGS Language 1. Press the SETUP button. 2. Press the button, then press the or button to select desired option (OSD language, Subtitle, Audio or DVD menu). 3. Press the button, then press the or button to be adjusted, press the OK button. The screen will change to your selected language immediately. 4. Repeat steps 2 and 3 above to adjust other option. 5. Press the button to return to the previous menu. Press the SETUP or RETURN button to exit menu. Video 1.
RADIO OPERATION 1. Press the FUNCTION button to select RADIO. 2. Press the STOP button on the front panel or the BAND button on the remote control to select FM or MW. 3. Press the TUNING buttons on the remote to tune in to a desired station. FM Stereo Press the MONO/STEREO button on the remote control until “ ” appears on the front panel display. Weak FM stations Press the MONO/STEREO button on the remote control until “ ” appears on the front panel display.
MAINTENANCE Cleaning the Disc A defective or soiled disc inserted into the unit can cause sound to drop out during playback. Handle the disc by holding its inner and outer edges. • Do NOT touch the surface of the unlabeled side of the disc. • Do NOT stick paper or tape on the surface. • Do NOT expose the disc to direct sunlight or excessive heat. • Clean the disc before playback. Wipe the disc from the centre outward with a cleaning cloth. • NEVER use solvents such as benzine or alcohol to clean the disc.
TROUBLESHOOTING GUIDE SYMPTOM CAUSE (AND REMEDY) No power. • Check that the AC power cord is connected. No picture. • • • • • The picture is not clear. • If video from your system has to go through your VCR to get to your TV, the copyprotection applied to some DVD programs could affect picture quality. • The disc is scratched. • The DVD unit may be set to progressive scan, moreover, TV does not suppor t Progressive Scan component video signal.
Disposal of Used Electrical & Electronic Equipment The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical & electronic equipments waste. In the European Union and Other European countries which there are separate collection systems for used electrical and electronic product.
