User manual

5
ACAD30B
2x ISO Wire Cable
1 Operator manual
i
If any item is missing,
please contact your reseller.
Installation3.
This unit can be installed in any
dashboard having an opening as
shown in the picture. The dashboard
should be 4.75 - 5.56 mm thick in
order to be able to support the unit.
The unit should be installed
horizontally in an angle less than 20°.
i
First complete the electrical
connections, and then
check them for correctness.
● Remove the outer edge from the
unit.
● Remove the detachable control
panel.
● Remove the release screws.
● Insert the release keys to separate
the unit from the mounting bracket.
Keep the release keys in a safe
place for future use.
● If necessary, attach the support
strap to the car body using the
tapping screw.
● Insert the mounting bracket into
the dashboard, and bend the
mounting tabs out with a
screwdriver.
182mm
53mm