User manual

17
ACAD30B
● To view a specic title of a DVD, press the TITLE button (64).
Use the arrow buttons to select the title.
● To select the audio language of a DVD, press the AUDIO button (37)
repeatedly until the desired language is set.
● To switch on the subtitles of a DVD, press the SUBTITLE button (33).
Press the button again to switch off the subtitles.
● To select extra information of a DVD or CD (remaining time/passed
playtime/track number/chapter number), press the OSD button (41).
● To select the camera angle, press the ANGLE button (35).
● To return to the main menu or go back one level, press the TITLE button
(64).
● To switch between PAL and NTSC, press the P/N button (45).
i
● Normally, if an MP3 disc is loaded, the unit will take longer time to read
the initial data.
● A DVD that does not match the region code cannot be read by this appliance.
● Do not load the disc upside down.
● If a disc contains mixed content (e.g. MP3 and video les), the appliance
will only recognise, list and play one content type.
● The screen saver becomes active if no disc has been loaded for
3 minutes, or if the appliance has been in STOP mode for 3 minutes.
Using the GO TO function
The GO TO function can be used to select a specic starting point on a DVD
or CD.
● Press the GO TO button (31).
● Press the arrow buttons to select an entry.
The possible entries for DVD are:
Disc time -
Chapter -
Title -
Chapter time -
Title time -
The possible entries for CD are:
Track time -
Specic track -
● Press the digit buttons to set a selection.