User manual

13
ACAD30B
● To access the TREBLE control, press the FUNCTION button (3) once
again. To adjust the level, turn the VOLUME dial (3) until the desired level
is set.
● To access the BALANCE control, press the FUNCTION button (3) once
again. To adjust the level, turn the VOLUME dial (3) until the desired level
is set.
● To access the FADER control, press the FUNCTION button (3) once
again. To adjust the level, turn the VOLUME dial (3) until the desired level
is set.
● To access the equalizer, press the EQ button (35).
● To connect an external audio device, insert the cable plug in the LINE IN
receptacle (15).
i
● When the appliance is used for the rst time, the display is calibrated.
● Upon switching on, the appliance is default in the radio mode, unless
there is a disc in the slot.
● Selection of the USB mode or the memory card mode only works if a USB
device or a memory card is placed in the slot.
Radio functions5.3
● To select the radio band, press the BD/LD button (43) to toggle between
FM1, FM2, FM3.
● To select a preset radio station, press the appropriate PRESET STATION
button (4-6 & 9-11) shortly.
● To search for a specic frequency, press the SEEK- button (38) or the
SEEK+ button (61) repeatedly until the desired frequency is set.
● To search automatically, press and hold the SEEK- button (38) or the
SEEK+ button (61) The appliance searches for the next available station.
● To perform an automatic search for preset radio stations, use the AUTO
SEEK (AS) function (13). Short press to search for all preset stations in
the memory of the current band and stay on each memory station for
about 5 seconds. Long press to save the stations with good reception
automatically and scan each station for about 5 seconds.
● To perform an automatic scan of preset radio stations, use the PRESET
SCAN (PS) function (13). Press to scan all preset stations in the memory
of the current band and stay on each memory station for about 5 seconds.