User Manual

295
Use the Scale & Octave fields to determine the root note and the scale type.
Root Note (pitch and register): This is the starting point of the scale. The available notes are all chromatic notes
across the range of the pads. The pad that’s assigned the root note will be lit differently (and highlighted on the
screen) to indicate where the scale starts in each octave.
Scale Type: This is the scale or mode based on the root note (this is disabled when Type is set to Progressions).
The available scales are:
Majo
r
Gypsy Dorian
Minor (melodic) Hungarian Gypsy Phrygian
Pentatonic Majo
r
Persian Lydian
Pentatonic Mino
r
Major Bebop Mixolydian
Blues (minor) Whole Tone
A
eolian
Flamenco Chromatic Locrian
Use the Chord fields to determine what chord type will play when pressing a pad. The chord will use those scale
degrees based off of the pad’s root note. You can use this only when the Type is set to Chords or Chromatic Chords.
When set to Chords, the available chords are:
1-3-5 (major/minor) 1-3-5-7 (major7/minor7)
1-4-5 (sus4) 1-3-5-7b (dominant)
1-2-5 (sus2)
When set to Chromatic Chords, the available chords are:
Majo
r
Major7
A
ugmented
Mino
r
Minor7 Diminished
Sus2 Major9
Sus4 Minor9
Use the Banks selector to determine how the notes are mapped across the pad banks.
Start on Root: Pad 01 will always be the root note of the scale in every pad bank.
Continuous: Pad 01 of one bank is always one scale degree higher than Pad 16 of the previous bank.
You can use the buttons at the bottom of the screen to quickly select different Types and Chords:
Tap Notes to automatically set the Type to Notes.
Tap 1-3-5 to automatically set the Type to Chords and set the Chord to 1-3-5 (major/minor).
Tap 1-3-5-7 to automatically set the Type to Chords and set the Chord to 1-3-5-7 (major7/minor7).
Tap Progressions to automatically set the Type to Progressions.
Tap Octave –/+ to shift the pad assignments down or up by an octave.
Press Shift+1-4-5 to automatically set the Type to Chords and set the Chord to 1-4-5 (sus4).
Press Shift+1-3-5-7b to automatically set the Type to Chords and set the Chord to 1-3-5-7b (dominant).
Press Shift+Note –/+ to shift the pad assignments down or up by a semitone, essentially raising or lowering the
Root Note fi
eld by a half-step.