User Manual

292
XY Pad
These are the MIDI parameters you can edit for each axis of the XY pad:
Control: This is the axis you are currently editing (XYFX X-Axis or XYFX Y-Axis). This field will be hidden if you
tapped the XY tab to show the XY pad’s parameters. You can tap the Hardware tab to show this field.
Mute: This button determines whether the axis is muted or not. When muted, its MIDI output is disabled. You
must be viewing the Settings to do this.
MIDI Channel: This determines which MIDI channel (1–16) the axis will use to send its message to the software.
CC Number: This determines what MIDI Control Change number the axis will send to the software.
Low Range: This is the axis’s lowest possible value (0–127).
High Range: This is the axis’s highest possible value (0–127).
MIDI Learn
You can use the MIDI Learn function to assign external MIDI controllers to various parameters in your specific MPC
project:
• Mixer parameters such as volume, pan, mute, and solo for MIDI or audio tracks, programs, returns, submixes,
and master outputs
• Pad parameters (for drum programs and clip programs only) such as tuning, filter and amp envelopes, layer
settings, LFO settings, and velocity
• Program parameters, which depend on the program type
• Insert effects parameters, which depend on the effect type
These assignments will be saved with your MPC project.
See Addenda > Updates in MPC 2.2 > New Features > MIDI Control Mode: MIDI Learn for more information.