Manual

44
Save
To save the project, tap the disk icon at the top of the
touchscreen. If you have already saved the project, your
changes will be saved. If you have not saved the project
yet, use the Save window to save the project:
To select the storage device you want to view, tap it
in the Storage column on the left. Internal is the MPC
Live’s internal drive. MPC Documents is a shortcut to
the MPC Documents folder on the internal drive. If you
have USB drives connected to MPC Live’s USB ports,
they will appear in this column, as well.
To enter a folder, double-tap it. Alternatively, turn the
data dial or use the –/+ buttons to move through the
list, and press the data dial to enter a folder. You can
also tap one of the five folder buttons in the upper-right
to jump immediately to those pre-assigned file paths
(see Modes > Browser to learn how to do this).
To create a new folder, tap New Folder, use the virtual keyboard that appears to enter a name, and then tap Do
It. You will immediately enter the new folder.
To move up one folder level, tap the folder/ icon.
To name the file, tap the File Name field at the bottom of the touchscreen, and use the virtual keyboard that appears.
To save the file, tap Save.
To cancel and return to the Menu, tap Cancel. Alternatively, tap the  icon in the upper-left corner.
Preferences
To return to the Menu, tap the  icon in the upper-left
corner. Any changes you have made in the Preferences will
be retained.
To restore your MPC Live’s default settings, tap Reset.
In the screen that appears, tap OK to continue or Cancel
to return to the Preferences. In the next window, tap Save
to save your current project before restoring the default
settings; tap Cancel to return to the Preferences; or tap
Don’t Save to restore the default settings without saving
your current project.
To enter Update Mode, press and hold Shift and tap
Update. In the screen that appears, tap Save to save your
current project before entering Update Mode; tap Cancel
to return to the Preferences; or tap Don’t Save to enter
Update Mode without saving your current project.
Info
This screen shows current information about your MPC Live: its current firmware version, which includes its standalone
operating system (MPC Firmware); its hardware Serial Number; and its current firmware for the Control Surface.
Auto Save
The settings on this screen determine if (and how) projects are automatically saved.
Enabled: When enabled, MPC Live will automatically save your current project after each Timeout interval. When
disabled, MPC Live will not automatically save your project; you may save only manually.
Timeout: Use this field to select how often your project will automatically save.