Manual

42
CV Programs
A CV program lets you send your control voltage (CV) signals
to an external MIDI device like a synth or drum machine that
uses CV.
Important: CV programs are available only while using MPC X.
MPC Live does not have CV ports.
To create a CV program:
1. Press Main to enter Main Mode.
2. Next to the Track field, tap the CV icon, which indicates
a CV program.
3. If the project does not contain a CV program yet, a new
CV program will be added automatically to the project
and appear in the Program field below.
If the project already contains a CV program, it will be
selected automatically and appear in the Program field
below.
To create another CV program, tap the + icon above
the Program field. A new CV program will be created
and appended with a number (e.g., CV 002).
To rename the program, tap the cursor icon on the
right edge of the Program section. Use the virtual
keyboard that appears to enter a new name, and then
tap Do It to confirm or the grey bar at the top of the
touchscreen to cancel.