Manual

36
Alternatively, assign samples in a drum program this way:
1. Press Menu and then tap Program Edit to enter
Program Edit Mode.
2. Tap Samples. This lets you view the samples assigned
to all four layers of the current keygroup as well as
tuning and level parameters for each layer.
3. Tap a pad to select it (and play its assigned samples, if
any). The pad will be lit green.
4. Tap the field for a layer, and then use the data dial or –
/+ buttons to select a sample. Alternatively, double-tap
the field for a layer, and then tap a sample to select it.
Tip: Press Q-Link to select the first bank, and then use
the Q-Link knobs to quickly select a sample for each
layer of the selected pad.
Tip: Remember that a drum program has 128 pads
total—16 pads across eight banks.