Manual

182
Tap the Learn button to turn Learn Mode on or off. When on, adjusting a control in the MPC software window will
immediately assign it to the currently selected Q-Link knob.
This button is not available while in Screen Q-Link Edit Mode where the Q-Link knobs are unassignable.
To assign a function to a Q-Link knob in Learn Mode:
1. Tap Learn so the button is lit. (This will stop playback. Resuming playback will exit Learn Mode.)
2. Touch or turn the desired Q-Link knob.
3. In the MPC software on your computer, click and drag the slider or knob you want to assign to the Q-Link knob.
The Q-Link knob will be able to control that parameter immediately.
To assign functions to other Q-Link knobs, repeat Steps 2–3.
To exit Learn Mode, tap Learn (or resume playback).
The automation button indicates the global automation state. This is shown in several modes. See General Features
> Automation to learn about this.
At any time, in any mode, you can show the QLink window over the touchscreen’s current contents. These are the
same parameters and settings as what is shown in Q-Link Edit Mode.
To show the QLink window, press and hold the Q-Link button.
To close the QLink window, release the Q-Link button.
While the QLink window is shown:
To select a column or row of knobs, tap it.
To adjust the settings of the selected knobs, turn the corresponding Q-Link knobs on MPC Live.
To select an edit mode for the Q-Link knobs, tap one of the five buttons at the bottom of the touchscreen:
Project, Program, Pad Scene, Pad Parameter, or Screen.
To turn Learn Mode on or off, tap Learn. (This button is not available while in Screen Q-Link Edit Mode where
the Q-Link knobs are unassignable.)
To enter Q-Link Edit Mode immediately (regardless of the current mode), tap Q-Link Edit at the bottom of the window.