User manual

Getting Started
10
File transfer status is displayed in the [File Transfer] tab.
3. When the file transfer is complete, the selected music files have
been added to the device library.
1. Connect the device to your computer’s USB port and then execute
iriver plus 4.
2. Select [Device > Initialize Disc]. When the window pops up asking
whether to proceed with initializing the disc, click [Start].
3. When the initialization process is finished, the Complete window will be
displayed and the device can be disconnected from your computer.
Initializing the Disc
File recovery is not possible if files have been deleted from the device. Backup all
data before initializing the disc.
1. Connect the device to your computer’s USB port while connected
to the Internet and then execute iriver plus 4.
2. Select [Device > Firmware Upgrade], and the Upgrade window will
be displayed. Complete the firmware upgrade by following the
instruction window.
Upgrading the Firmware
Insufficient battery power may prevent initiation of firmware upgrade.
Never disconnect the device from your computer while a firmware upgrade file is
being downloaded.
After the download is completed, the upgrade will be initiated when the device is
disconnected from your computer.
A pop-up window will display the version of firmware installed.
When newer firmware versions are available, a notification window will be displayed
when the device is connected to the computer.