User manual

66
Format
Customer Support
Firmware Upgrade for T30 in iriver plus 2
Firmware Upgrade
65
Customer Support
Note
Before upgrading the firmware, check the condition of the battery. The firmware upgrade may fail due to low battery.
Your computer must be connected to the internet for the "Firmware Update" function.
Do not turn the player off until the upgrade is completed.
What is firmware ?
It is the operating system that works in the T30. iriver provides you with the latest and best features through
Firmware upgrade. You can choose manual or automatic upgrade function. For information on automatic
upgrade,refer to the iriver plus 2 instruction manual.
Please initialize T30 player in the following cases.
All music,pictures,text,and data will be erased from the player during this initialization.
- if there appears to be corruption on the internal hard drive.
- if an error message displays and the player doesn't boot properly.
1. Connect the USB cable to the USB port on the player and to your PC.
2. Open iriver plus 2.
Select [Option-Portable Device
Initialization ].
Initializing T30
3. To initialize the product, click [YES].
USB port on the PC
USB port on the T30
USB cable
1. Connect the USB cable to the USB port on the player and to your PC.
USB port on the PC
USB port on the T30
USB cable
2. Open iriver plus 2.
Select [Option-Firmware
Upgrade ] from the menu.
When the download is completed,
disconnect USB cable to start
upgrading firmware automatically.