Quick Start

1-1
Charging the battery
1. Push the USB lever and pull out the USB connection port as below picture.
2. Connect the player to the PC.
3. “USB Connected” on the display is appeared, charging indicator is displayed.
1. Locating the controls
2. Connection
Your player may differ sightly from that shown in the illustrations.
1-2
Connecting to the PC
1. Push the USB lever and pull out the USB
connection port as below picture and
connect the player to the PC.
2. Open Windows Explorer and an additional
drive should be listed called “T20”.
"Safely Remove Hardware" from the PC
1. Select the “Safely Remove Hardware” after
clicking the “Safe To Remove Hardware” by
right-clicking your mouse.
2. Click the “Stop” after selecting the device to
remove, then click “OK”.
3. Click “Close” after confirming the Safely
Remove Hardware message.
(In case of Windows XP)
Mode/REC button
Volume - button
Volume + button
Hold Switch
LCD Screen
Microphone
Line In Jack
Earphone Jack
Neck Strap Connection Part
Play/Stop button
Previous/Fast Reverse button
Next/Fast forward button
USB Lever
USB connection port