User manual
Table Of Contents
- INTRODUCTION
- Locating the Controls
- Control Buttons on your Portable Media Center
- Common Tasks
- Controls and menus
- Getting Started
- Requirements
- Running the Setup Disc
- Hardware Connection
- Turning Your Portable Media Center On and Off
- Add Digital Media Content to Your Portable Media Center
- Charging the Battery in Your Portable Media Center
- Updating the Software Running on Your Portable Media Center
- Digital Media File Types You Can Play on Your Portable Media
- Protected Content
- Finding Information About Your Portable Media Center
- Portable Media Center Help
- USING PORTABLE MEDIA CENTER
- Playing and Viewing Digital Media Content
- Browsing For New Content
- Browsing For and Playing TV Shows
- Music on Your Portable Media Center
- Pictures on Your Portable Media Center
- Using the Bookmark Feature
- Connecting Your Portable Media Center to a TV or Stereo
- Changing the Volume
- Locking Controls and Buttons
- Tips and Tricks
- Playing and Viewing Digital Media Content
- CUSTOMIZING PORTABLE MEDIA CENTER
Setting Display Options
- 125 -
To set the TV Out option
1. On the Start screen, click Settings; then click Display.
2. On the Display screen, click TV Out.
3. Use the Up and Down buttons to select TV display: NTSC, the display
format most common in the United States, or TV display: PAL, the format
most common outside the United States; then press the OK button.
The following message appears:
You are about to switch to TV display. To return to Device display, turn power
off and then on.
The TV displays the screens previously displayed on your Portable Media
Center.
Selecting TV display: NTSC or TV display: PAL works only if your
Portable Media Center is connected to a TV with the correct video cable.
To return to the previous screen without making a selection, press the Back
button.
To return to the Start screen without making a selection, press the Start button.