Hardware Instruction Manual Digital Audio Player/recorder/Camera/FM Tuner Model iFP-1000 Series iFP-1000 Series Thank you for your purchase. Please read this manual carefully before using your new player. http://www.iRiver.com http://www.iRiver.
FFC Certification THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE, RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Getting started Contents 1-1 Features 1-2 About power supply 1-3 Getting started Getting started Internet This manual covers the installation and use of the player hardware. For details regarding the software operation including transferring music to the player, please see the Software Instruction Manual.
Internet Features URL : www.iRiver.com " Find information on our company, products, and customer and technical support. " Update your player with firmware downloads. Firmware upgrades offer support for new CODECS and deliver new product features. " Consult the product FAQ. " Register your iRiver product online so that our Customer Service is able to provide support as efficiently as possible.
About power supply About power supply Battery detach/attach Charging by using USB cable Note " " " To detach : Press the tab to release the battery and slide it out of the player. " To attach : Slide the battery onto the player until it locks into place. The player will charge even if it is turned off. A charging indicator light will illuminate while the player is charging. The light will turn off when charging is complete.
Locating the controls Contents 2-1 Rear View 2-2 LCD screen 2-3 Locating the controls Getting started Front View This manual covers the installation and use of the player hardware. For details regarding the software operation including transferring music to the player, please see the Software Instruction Manual.
Locating the controls Locating the controls Front view Rear view Neck strap Hold Battery Lock Rechargeble Battery Charging indicator Volume -, Reduce, Down Camera I Camera lense Locating the controls Locating the controls Microphone Earphone Volume +, Enlarge, Up NAVI/MENU I (Next / Fast forward) (Previous / Fast Reverse) LCD Screen USB connection port Power on/off, / (Play/Stop), Stereo Mode/REC/Shot MEMORY/EQ A-B (Interval repeat) Picture flip 2-1 2-2
Locating the controls PC software installation LCD Screen Contents Clock Bit rate Sampling rate Status Current bar File number Playing time Playback node Folder icon Folder name Note PC software installation 3-1 Attach the player 3-4 PC software installaion Locating the controls Equalizer Visualization Program/file icon 2-3 Hold File format Volume Battery indicator Artist/title name According to file type displayed as follows : WMA : WMA ASF : ASF MP3 : MP3 IRM : IRM OGG : OGG " IRM (iR
PC software installation MPORTANT, please complete the steps in this section BEFORE ATTACHING YOUR PLAYER TO YOUR PC. Software installation " PC software installation Software installation Insert the Installation CD into the CD-ROM drive. The following screen appears after inserting the CD. " " If the installation doesn't automatically begin, execute the "setup.exe" file in the installation CD. The installation program will begin.
PC software installation Attach the player Software installation “Next” after confirming the 5 Click installation folder. Connecting to the PC 6 Click “Install” to begin the installation. 1 Connect the USB cable (provided) to the USB port of your computer. USB port on the PC Type “A” Type “A” Type “B” is in progressing. 7 Installation Click “Finish” after the installation is completed. Type “B” “USB CONNECTED” will appear on the on the player by pressing the button 2 Turn marked STEREO.
Attach the player Attach the player Installation of New Hardware Installation of New Hardware computer will automatically search to installing iRiver Music Manager from 1 After 2 The find your new hardware. the CD and connecting the player to your 5 The installation will continue. “Finish” 6 Click Completed the installation of “New hardware”. PC, "Found New Hardware" screen is displayed. (Windows XP) The iRiver software driver will not cause any damage to your computer.
Attach the player Basic operation Safely Removing the player from the PC the “Safely Remove hardware” 1 Select after clicking the “Safe To Remove the “Stop” after selecting the device 2 Click to remove. Hardware” by using the right button of mouse. 4 Click the “Close” after confirming the Safely Remove Hardware message.
Basic operation Basic operation Turning on the player " Connect the earphones as shown below. Changing functions " Put the HOLD switch to “OFF”. OFF Press and hold MODE button to appears current function on the LCD screen. Push the NAVI/MENU button toward or to select the desired function, then click the NAVI/MENU button to enter that mode. h Pus h Pus " " Press the PLAY/STOP button to turn on the player. The “My Image” appears on the LCD. Press it again to play.
Basic operation Basic operation Navigation Listening to music 1 2 3 4 Press NAVI/MENU button and find the desired music file by pushing NAVI/MENU button to VOL + or VOL – direction. To play the files, press the NAVI/MENU button, push NAVI/MENU/VOL to the I direction or the PLAY/STOP button. To move to the upper folder, NAVI/MENU/VOL to the I direction. If there is no upper folder, NAVIGATION stops.
Basic operation Basic operation Tuning FM stations Push NAVI/MENU/VOL to the Shooting or To flip a picture direction to select desired station. h Pus Click Click Camera zoom in/zoom out Zoom in Press the STEREO/PLAY/STOP button to select Stereo/Mono.
Basic operation Basic operation Viewing a picture (My Album) Previous Next Customizing the function settings(Menu) You can customize this setting menu according to your preference. Press and hold NAVI/MENU button will enter the menu system. h Pus h Pus Full screen Click lick Long C Click Zooming a picture Zooming/cancel h Pus Click Press the button repeatedly to chose zoom size. ( x1 Note " " x1.5 x2.0 x2.5 or diretion. 1. Scroll between menus : Push NAVI/MENU button to the 2.
Listening to music Listening to the FM radio Playing music file FM radio listening Power off 1 Press and hold MODE button. The current function appears on the LCD screen. lick Long C playback mode Function Power on/play/stop A-B repeat Click Click Adjusting the volume lick Long C lick Long C NAVI/MENU/VOL to the or direction to select FM radio. 2 Push Press NAVI/MENU/VOL button to confirm.
Listening to the FM radio Listening to the FM radio Programming station preset manually Programming station preset automatically Automatically select stations and save them in sequential order.(It only activates while the player is not in PRESET mode) Press and hold MEMORY(A-B) button. Press NAVI/MENU/VOL button to cancel Automatically select stations and save preset mode. them in sequential order. 1 2 and hold MEMORY(A-B) button.
Listening to the FM radio Listening to the FM radio Deleting preset station 1 Tuning stations automatically Select the station to be deleted at preset mode. 2 Press and hold the MEMORY/EQ(A-B) button. PRESET CH 03 PRESET CH 04 Press NAVI/MENU/VOL button to cancel preset mode. Push and hold the NAVI/MENU/VOL to or direction. The frequencies are scanned automatically. When a broadcast is receied, canning stops.
Recording the FM stations Recording the FM stations To stop FM recording Recording the FM stations Press the MODE/REC button during FM reception. The station will be recorded, the remaining recording time will be displayed on the LCD screen. Press the MODE/REC button to stop recording. " The recorded file is saved as TUNER000.REC. " It is saved in the RECORD folder. " Recorded REC files can be converted to MP3 files using iRiver Manager.
Recording voice Recording voice Recording voice To pause recording voice 1 Press and hold the MODE/REC button to appears current function on the LCD screen. Press the PLAY/STOP button to pause the recording process. Press the PLAY/STOP button again to restart recording. lick Long C the NAVI/MENU button to the or direction to select Voice mode. 2 Press Press the NAVI/MENU button (or PLAY/STOP) to go to Voice recording mode. (The recorder will be in standby mode.
Digital camera Digital camera Shooting Shooting 1 Press and hold MODE button. The current function appears on the LCD screen. MEMORY/EQ(A-B) button to take a picture. 4 Press Press A-B button to flip a picture to flip a picture. lick Long C to flip Click NAVI/MENU/VOL to the or direction to select camera. 2 Push Press NAVI/MENU/VOL button to confirm. Select zoom in or zoom out.
Digital camera Digital camera Camera settings NAVI/MENU/VOL button. 2 1 Press The camera settings appear on the LCD screen. Press and hold NAVI/MENU/VOL buttonbutton to view the available settings. 5 Camera settings IPush NAVI/MENU/VOL to the I or I direction to select value. Select h Pus Click lick Long C " " " " Select and hold NAVI/MENU/VOL button 4 Press to change the setting. PLAY/STOP(STEREO) button to 6 Press NAVI/MENU/VOL button to confirm. 7 Press exit.
Viewing a picture(Album) Viewing a picture(Album) Viewing a picture Viewing a picture and hold MODE/REC button. The 1 Press current function appears on the LCD NAVI/MENU/VOL to the 2 Push direction to select My Album. screen. or Press NAVI/MENU/VOL button to confirm. Select h Pus lick Long C I ush MEMORY/EQ/(A-B) button to enlarge or to reduce a picture.(x1.5/x2.0/x3.0/x1.0) 4 PPush MENU/NAVI button to the VOL+, VOL- or I , I direction to shift the enlarged point.
Viewing a picture(Album) Convenient functions Deleting a picture 1 Contents Press and hold NAVI/MENU button after selecting the picture to delete. 2 Delete Push MENU/NAVI button to the or direction to select “Yes” or “No”. Push MENU/NAVI button to confirm. Yes/No h Pus 10:40 lick Long C Enter Click 1 10:40 2 Push MENU/NAVI button to the or direction to select “Yes” or “No”. Push MEMORY/EQ button to confirm.
Searching the music files(Navigation) Searching the music files(Navigation) Navigation Navigation 3 Select folder or scroll to upper folder Navigation is the function used for searching files. Navigate to locate tracks to play.
Searching the music files(Navigation) Enjoying the sound equalizer(EQ) Deleting a folder or file 1 EQ Mode Press the NAVI/MENU button wile the stop mode. Push the NAVI/MENU button to the or direction to select a folder or file. Select the folder or file Scroll up Select the upper folder You can select EQ mode in accordance to the playing music genre. Press and hold the MEMORY/EQ button to display the current EQ setting. Then press the button repeatedly to chose a different EQ.
Playback Mode Playback Mode Playback mode(Mode) You can set various Repeat and Shuffle options by choosing these selections under Mode. Change the Repeat or Shuffle mode by pressing the varied pressing the MODE button. Please refer to the MODE function controls (page 5-24) for user-defined configuration. Plying repeatedly(Repeat) Play a single track repeatedly. Play all tracks in the folder and stop. Play all tracks in the folder repeatedly.
Playing in a favorite order(Program) Playing in a favorite order(Program) Activiting program mode Activiting program mode Program mode: Create your own playlist. the MEMORY/EQ button at Stop playback. The program list is displayed. 1 Click If the player has been programmed already, the current program list will display. the NAVI/MENU button, then select the music to program by using the VOL+, VOL 3 Press switch. Up Click h Pus Click Down 4 Press the MEMORY/EQ button to save the program list.
Playing in a favorite order(Program) Playing in a favorite order(Program) Program play To cancel program mode After programming, press PLAY/STOP button to play the tracks in sequential order. Push MENU/NAVI button to the VOL direction at stop mode. Program playback is cancelled and normal playback is started. h Pus Click The program mode icon appears Exit To remove files from the program list Press the MODE/REC button after selecting the file to be deleted using the MEMORY/EQ button at stop mode.
Customizing the function settings(Menu) Configuration Configuration Convenient functions Convenient functions Note " " 5-11 Customizing the function settings(Menu) Functions are subject to change with different firmware versions. Users can configure their own settings.
Menu-Basic operation Menu-Basic operation Basic operation " " Enter Sub Menu Press and hold the NAVI/MENU button to display the menu system. The MENU system is composed of 6 main menus with sub-menus. Main menu Sub menu lick Long C Push the NAVI/MENU button to the Previous Click or direction to select menu. You can set, cancel or change sub nenu by pushing the NAVI/MENU button toward or VOL +, VOL -. Up Next Previouse lick or C h Pus Next Down h Pus Exit Sub Menu 2 Click NAVI/MENU button.
Menu-General Menu-General Gerenal Loard Default Initialize menus to the original factory settings. The button’s operation order is as below. Click NAVI/MENU (select default menu) or VOL+ (select YES) Press NAVI/MENU (select YES : Initialization) Resume ON : Playback resumes from the previous location in a song when the player is stopped or powered off. OFF : Playback begins from the first track after the player is stopped or powered off.
Menu-Display Menu-Display Display Scroll Speed Adjust scroll speed by 1x / 2 x / 4x / Vertical / Horizontal. Vertical : The scroll goes up and down Horizontal : The scroll goes from the left to the right. Tag Information Back Light You can adjust the time that the Backlight stays on. SEC : Backlight stays on from 3 to 30 seconds. MINUTE : Backlight stays on from 1 to 30 minutes. Press the NAVI/MENU button to set SEC/MINUTE.
Menu-Timer Menu-Timer Timer Set Time Set the current time. Push the NAVI/MENU switch toward I or I to select the item and toward VOL + or VOL - to set the clock. Use the I or I switch to adjust time. Alarm/Record Select Sleep Power Off Set Alarm Stop Power Off Automatically turns the power off at the stop mode. (Time range can be set from 1 to 60 minutes by a minute) Use the or switch to adjust time. min Set the working time of alarm.
Menu-Timer Menu-Control Tuner Rec. Reservation Control Set the time and station to be recorded. Push the NAVI/MENU switch toward or to select the item and toward VOL + or VOL - to set the recording time. FF/RW Skip OFF : Skip doesn’t activate. 10 : Skip 10 tracks at time. DIRECTORY : Skip to previous or next folder. This defines the operating method of short or long press of or switch.
Menu-Control Menu-Mode Mode Voice Recording Mode You can adjust recording quality when recording voice. ON : When recording voice, the recording level is automatically controlled and recordings from long distances are enhanced. OFF : AGC(Automatic Gain Control) not activated. Voice Auto Detection The voice recording mode will automatically pause during silence. This is useful for recording over a long period of time to save memory. OFF : Voice Auto Detection is disabled.
Menu-Mode Menu-Mode Intro Name Intro: Plays the beginning 10 seconds of each track. Intro Highlight : Plays 10 seconds from 1 minute into each track in sequential order. You can input your name or custom text. " , lever will skip the To scroll between English and your preferred language, use MEMORY/EQ button " To delete the character, press MODE button. " Press PLAY/STOP button to save and exit.
Menu-Sound Menu-Sound Sound Xtreme 3D You can adjust the level of 3D sound(minimum, Natural, and Maximum). You can extend 3D sound by selecting Bass Boost or 3D EQ. You can also adjust the level of 3D sound with the or lever. Select DBE or 3D EQ with the Navi/Menu button. Xtreme EQ DBE Setting You can adjust the sound to your preference. There are 5 band frequency steps, set from -15dB to +15dB by 3dB step. " You can select the Bass Center Band level from Band 1 to 4.
Menu-Sound Menu-Sound Beep Volume Sound Balance Balance your sound to the right or left or keep it in the center according to your preference. When Sound Balance bar is moved to L (Left, 20),the sound outputs at the left earphone. When the lever is moved to R (Right, 20) the sound outputs at the right earphone. The default value is 0 and the sound outputs the same level at both earphones. Set beep volume level. Set to "0" for OFF.
Additional Information Contents 6-1 Precautions 6-2 Accessories 6-3 Specifications 6-4 Additional Information Convenient functions 5-31 Trouble shooting 6
Precautions Trouble Shooting Should any problem persist after you have checked these symptoms, consult your iRiver dealer or contact support at www.iRiver.com. Safety Avoid dropping or impacting the player. The player is designed to operate while walking or running, but dropping or excessively impacting the player maybe cause damage. " Avoid contacting the player with water. Damage to the internal parts of the player may occur if the player comes into contact with water.
Accessories Specifications 1 Earphone/ Earphone cover 2 USB cable 3 Installation CD Memory Model No 256MB iFP-1090 512MB iFP-1095 Memory is not expandable. Category 4 UserManual/ Warranty card/Quick Start Guide 7 Carrying Case 5 Rechargeble Battery(1EA) 6 Neck strap for carrying 8 Arm Band 9 Adapter " Accessories subject to change without notice and may vary from image shown. Specifications Max. Playtime USB Operational Temperature Approx. 18:00 hrs (32kbps, 256 MB) Approx.
